[GIT PULL][3/4] RISC-V soc drivers for v7.4

[Conor Dooley]

Hey folks,

Diff here contains a lot of clock bindings, so I've provided an explanation
in the tag.

Thanks,
Conor.

The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:

  Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ riscv-soc-drivers-for-v7.4

for you to fetch changes up to 6f77194e1147d85c10b4964edee7091c701a25c2:

  soc: mpfs: use kref cleanup on probe failure (2026-10-13 15:43:15 +0100)

----------------------------------------------------------------
RISC-V misc. soc drivers for v7.4

StarFive:
Syscon bindings and a socinfo driver for the JHB100. There ended up
being several clock bindings here also because the clock tree needed the
whole lot due to headers and I envisaged this being part of a three-way
shared tag between my soc driver branch, dts branch and the clock tree.
Due to timing, the dts branch didn't get this content, leading to the
slightly odd branch here.

Microchip:
A bugfix for teardown code in the mpfs system controller driver.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>

----------------------------------------------------------------
Changhuang Liang (9):
      dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator
      dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules
      soc: starfive: Add socinfo driver for JHB100 SoC

Guangshuo Li (1):
      soc: mpfs: use kref cleanup on probe failure

 .../bindings/clock/starfive,jhb100-per0crg.yaml    |  70 +++
 .../bindings/clock/starfive,jhb100-per1crg.yaml    |  70 +++
 .../bindings/clock/starfive,jhb100-per2crg.yaml    |  76 +++
 .../bindings/clock/starfive,jhb100-per3crg.yaml    |  76 +++
 .../bindings/clock/starfive,jhb100-sys0crg.yaml    |  63 +++
 .../bindings/clock/starfive,jhb100-sys1crg.yaml    |  71 +++
 .../bindings/clock/starfive,jhb100-sys2crg.yaml    |  64 +++
 .../soc/starfive/starfive,jhb100-syscon.yaml       | 115 +++++
 drivers/soc/Kconfig                                |   1 +
 drivers/soc/Makefile                               |   1 +
 drivers/soc/microchip/mpfs-sys-controller.c        |   7 +-
 drivers/soc/starfive/Kconfig                       |   6 +
 drivers/soc/starfive/Makefile                      |   2 +
 drivers/soc/starfive/socinfo/Kconfig               |  13 +
 drivers/soc/starfive/socinfo/Makefile              |   2 +
 drivers/soc/starfive/socinfo/jhb100-socinfo.c      | 105 ++++
 include/dt-bindings/clock/starfive,jhb100-crg.h    | 554 +++++++++++++++++++++
 include/dt-bindings/reset/starfive,jhb100-crg.h    | 189 +++++++
 18 files changed, 1482 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jhb100-syscon.yaml
 create mode 100644 drivers/soc/starfive/Kconfig
 create mode 100644 drivers/soc/starfive/Makefile
 create mode 100644 drivers/soc/starfive/socinfo/Kconfig
 create mode 100644 drivers/soc/starfive/socinfo/Makefile
 create mode 100644 drivers/soc/starfive/socinfo/jhb100-socinfo.c
 create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
 create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20261013/d972623a/attachment.sig>