[PATCH v6 06/15] clk: starfive: Add JHB100 System-1 clock generator driver

[Jerome Brunet]

> Add support for JHB100 System-1 clock generator (SYS1CRG).
> 
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  drivers/clk/starfive/Kconfig                  |  10 ++
>  drivers/clk/starfive/Makefile                 |   1 +
>  .../clk/starfive/clk-starfive-jhb100-sys1.c   | 118 ++++++++++++++++++
>  3 files changed, 129 insertions(+)
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys1.c
>
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index cd5b7754403e..11da8bcc4046 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -82,3 +82,13 @@ config CLK_STARFIVE_JHB100_SYS0
>  	help
>  	  Say yes here to support the system-0 clock controller on the
>  	  StarFive JHB100 SoC.
> +
> +config CLK_STARFIVE_JHB100_SYS1
> +	bool "StarFive JHB100 system-1 clock support"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	select CLK_STARFIVE_JH71X0
> +	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
> +	default ARCH_STARFIVE
> +	help
> +	  Say yes here to support the system-1 clock controller on the
> +	  StarFive JHB100 SoC.
> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
> index d2ba83d7d02c..0061550e0f7e 100644
> --- a/drivers/clk/starfive/Makefile
> +++ b/drivers/clk/starfive/Makefile
> @@ -12,3 +12,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
>  obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
>  
>  obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
> +obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
> diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys1.c b/drivers/clk/starfive/clk-starfive-jhb100-sys1.c
> new file mode 100644
> index 000000000000..db37b243db18
> --- /dev/null
> +++ b/drivers/clk/starfive/clk-starfive-jhb100-sys1.c
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * StarFive JHB100 System-1 Clock Driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + *
> + * Author: Changhuang Liang <changhuang.liang at starfivetech.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/starfive,jhb100-crg.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-starfive-jh71x0.h"
> +
> +#define JHB100_SYS1CLK_NUM_CLKS			(JHB100_SYS1CLK_BMCPER3_CFG_125 + 1)
> +
> +/* external clocks */
> +#define JHB100_SYS1CLK_OSC			(JHB100_SYS1CLK_NUM_CLKS + 0)
> +#define JHB100_SYS1CLK_PLL0			(JHB100_SYS1CLK_NUM_CLKS + 1)
> +#define JHB100_SYS1CLK_PLL1			(JHB100_SYS1CLK_NUM_CLKS + 2)
> +#define JHB100_SYS1CLK_PLL2			(JHB100_SYS1CLK_NUM_CLKS + 3)
> +#define JHB100_SYS1CLK_PLL4			(JHB100_SYS1CLK_NUM_CLKS + 4)
> +#define JHB100_SYS1CLK_PLL5			(JHB100_SYS1CLK_NUM_CLKS + 5)
> +#define JHB100_SYS1CLK_NPU_NCNOC_INIT		(JHB100_SYS1CLK_NUM_CLKS + 6)
> +
> +static const char * const jhb100_sys1_ext_clk[] = {
> +	"osc",
> +	"pll0",
> +	"pll1",
> +	"pll2",
> +	"pll4",
> +	"pll5",
> +	"npu_ncnoc_init",
> +};
> +
> +/*
> + * Regarding the CLK_IS_CRITICAL flag:
> + *   Clocks flagged CLK_IS_CRITICAL feed logic that has to keep running whether
> + *   or not a consumer holds them, such as the bus interconnect and always-on
> + *   blocks. Gating them hangs the system, so they must never be disabled.
> + *
> + * Regarding the CLK_IGNORE_UNUSED flag:
> + *   Clocks flagged CLK_IGNORE_UNUSED are not consumed by any driver. The flag
> + *   keeps them in their hardware default state (enabled) instead of letting
> + *   the clock framework gate them once it disables unused clocks.  If this
> + *   flag needs to be removed later, it must be ensured that these clocks will
> + *   not be disabled even if they are not consumed.

Those comments you are using are too generic and not really helpful as they are.

For example there is no CLK_IGNORE_UNUSED below but the comment mention it.

On the previous patch you've mention CLK_IS_CRITICAL and the fact the clock must stay on.
It is the flag definition so it does not help much.

For each clock with this flag, adding a quick comment explain *WHY* is must stay
ON would be a lot more helpful for a future contributor wondering why it was
put there and how it can possibly be removed. IOW, what device does this clock and
why doesn't it have a driver ?

... and again, I don't think a USB clock should be critical.

-- 
Jerome