[PATCH v2 0/2] PM: spacemit: Add power domain support

[Yixun Lan]

In this series, we try to add a Power Domain driver support for SpacemiT
K1/K3 SoCs, the driver implement the power-switch functionaly which support
power on/off, and it's based on Linux Generic PM Domain framework and
similiar to vendor K1's implementation, but unlike the K3's vendor
version which is more complicated.

  The DTS patch is obsolete, so drop it. For devices required PM property,
the DT part can be sent in separate patch.

  In order to test this series, a prerequisite CCU patches are needed,
which can be found here [1].

Link: https://lore.kernel.org/spacemit/20261008-04-k3-clk-pm-aux-v1-0-8372d7307694@kernel.org/ [1]
Signed-off-by: Yixun Lan <dlan at kernel.org>
---
Changes in v2:
- convert to auxilary driver
- no need dt-binding doc, drop it
- drop dts patch
- support to build as module
- set always on for K3 audio pm 
- no global variable for struct spacemit_pmu
- no force to do power-off in spacemit_pd_power_on()
- check return value of pm_genpd_init()
- adjust license header format
- Link to v1: https://patch.msgid.link/20260918-04-k3-pm-support-v1-0-0acd2b36b96f@kernel.org

---
Yixun Lan (2):
      dt-bindings: power: spacemit: Add power domain controller IDs
      pmdomain: spacemit: Add power domain driver

 drivers/pmdomain/Kconfig                        |   1 +
 drivers/pmdomain/Makefile                       |   1 +
 drivers/pmdomain/spacemit/Kconfig               |  21 ++
 drivers/pmdomain/spacemit/Makefile              |   1 +
 drivers/pmdomain/spacemit/spacemit-pm-domains.c | 413 ++++++++++++++++++++++++
 include/dt-bindings/power/spacemit,k1-power.h   |  14 +
 include/dt-bindings/power/spacemit,k3-power.h   |  12 +
 7 files changed, 463 insertions(+)
---
base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
change-id: 20260909-04-k3-pm-support-0bef40e87fd7

Best regards,
--  
Yixun Lan <dlan at kernel.org>