[PATCH v5 06/23] clk: starfive: Add JHB100 System-0 clock generator driver

[Changhuang Liang]

Hi, Brain

Thanks for the review.

> Hi Changhuang,
> 
> > Add support for JHB100 System-0 clock generator (SYS0CRG).
> >
> > Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index
> > 4f72b4ac27ee..a0e5b4df96aa 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -26097,6 +26097,13 @@ S:	Supported
> >  F:
> 	Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> >  F:	drivers/phy/starfive/phy-jh7110-dphy-rx.c
> >
> > +STARFIVE JHB100 CLOCK DRIVERS
> > +M:     Changhuang Liang <changhuang.liang at starfivetech.com>
> > +S:     Supported
> > +F:     Documentation/devicetree/bindings/clock/starfive,jhb1*.yaml
> > +F:     drivers/clk/starfive/clk-starfive-jhb1*
> > +F:     include/dt-bindings/clock/starfive,jhb1*.h
> 
> The spacing after the : doesn't line up with the other sections. It looks like this
> is using spaces instead of a tab.

I've double-checked on my end, and they're all tabs. Could you please help confirm that again?

Best Regards,
Changhuang