[PATCH 06/19] clk: sunxi-ng: add support for the Allwinner V861 CCU
Han Gao via B4 Relay
devnull+gaohan.iscas.ac.cn at kernel.org
Fri Nov 13 14:33:32 PST 2026
From: Han Gao <gaohan at iscas.ac.cn>
Add the main CCU driver for the V861, based on the A523 one. The CPU
PLL, the CPU subsystem clocks and the E907 clocks are left to the
firmware.
Unlike on the A523, the second divider of the 27 MHz output is a power
of two. pll-audio-4x does not pass rate changes up, as its parent also
feeds the UART clock mux.
Signed-off-by: Han Gao <gaohan at iscas.ac.cn>
---
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 2 +
drivers/clk/sunxi-ng/ccu-sun252i-v861.c | 1117 +++++++++++++++++++++++++++++++
3 files changed, 1129 insertions(+)
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 6af2d020e03e..890a0cbb45b6 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -22,6 +22,16 @@ config SUN20I_D1_R_CCU
default ARCH_SUNXI
depends on MACH_SUN8I || RISCV || COMPILE_TEST
+config SUN252I_V861_CCU
+ tristate "Support for the Allwinner V861 CCU"
+ default ARCH_SUNXI
+ depends on RISCV || COMPILE_TEST
+ help
+ Support for the main clock control unit of the Allwinner V861
+ SoC. It provides the PLLs, the bus and module clocks and the
+ reset lines of most peripherals, so it is required on boards
+ based on this SoC.
+
config SUN50I_A64_CCU
tristate "Support for the Allwinner A64 CCU"
default ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a1c4087d7241..01869330dc4e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -27,6 +27,7 @@ sunxi-ccu-y += ccu_mp.o
obj-$(CONFIG_SUNIV_F1C100S_CCU) += suniv-f1c100s-ccu.o
obj-$(CONFIG_SUN20I_D1_CCU) += sun20i-d1-ccu.o
obj-$(CONFIG_SUN20I_D1_R_CCU) += sun20i-d1-r-ccu.o
+obj-$(CONFIG_SUN252I_V861_CCU) += sun252i-v861-ccu.o
obj-$(CONFIG_SUN50I_A64_CCU) += sun50i-a64-ccu.o
obj-$(CONFIG_SUN50I_A100_CCU) += sun50i-a100-ccu.o
obj-$(CONFIG_SUN50I_A100_R_CCU) += sun50i-a100-r-ccu.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_SUN9I_A80_CCU) += sun9i-a80-usb-ccu.o
suniv-f1c100s-ccu-y += ccu-suniv-f1c100s.o
sun20i-d1-ccu-y += ccu-sun20i-d1.o
sun20i-d1-r-ccu-y += ccu-sun20i-d1-r.o
+sun252i-v861-ccu-y += ccu-sun252i-v861.o
sun50i-a64-ccu-y += ccu-sun50i-a64.o
sun50i-a100-ccu-y += ccu-sun50i-a100.o
sun50i-a100-r-ccu-y += ccu-sun50i-a100-r.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun252i-v861.c b/drivers/clk/sunxi-ng/ccu-sun252i-v861.c
new file mode 100644
index 000000000000..af84c49fbaf1
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun252i-v861.c
@@ -0,0 +1,1117 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2026 Han Gao <gaohan at iscas.ac.cn>
+ *
+ * Based on the A523 CCU driver:
+ * Copyright (C) 2023-2024 Arm Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/sun252i-v861-ccu.h>
+#include <dt-bindings/reset/sun252i-v861-ccu.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mux.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+static const struct clk_parent_data osc24M[] = {
+ { .fw_name = "hosc" }
+};
+
+/**************************************************************************
+ * PLLs *
+ **************************************************************************/
+
+/* The CPU PLL at 0x000 is left to the firmware. */
+
+#define SUN252I_V861_PLL_DDR_REG 0x010
+static struct ccu_nkmp pll_ddr_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_DDR_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-ddr", osc24M,
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_GATE |
+ CLK_IS_CRITICAL),
+ },
+};
+
+/*
+ * There is no clock output at the VCO rate (2.4 GHz). The outputs have their
+ * own dividers, so model them as divider clocks of the VCO.
+ */
+#define SUN252I_V861_PLL_PERIPH0_REG 0x020
+static struct ccu_nm pll_periph0_4x_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_PERIPH0_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-periph0-4x",
+ osc24M, &ccu_nm_ops,
+ CLK_SET_RATE_GATE),
+ },
+};
+
+static const struct clk_hw *pll_periph0_4x_hws[] = {
+ &pll_periph0_4x_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
+ pll_periph0_4x_hws, 0x020, 16, 3, 0);
+static const struct clk_hw *pll_periph0_2x_hws[] = {
+ &pll_periph0_2x_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_periph0_800M_clk, "pll-periph0-800M",
+ pll_periph0_4x_hws, 0x020, 20, 3, 0);
+static SUNXI_CCU_M_HWS(pll_periph0_480M_clk, "pll-periph0-480M",
+ pll_periph0_4x_hws, 0x020, 2, 3, 0);
+static const struct clk_hw *pll_periph0_480M_hws[] = {
+ &pll_periph0_480M_clk.common.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_600M_clk, "pll-periph0-600M",
+ pll_periph0_2x_hws, 2, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_periph0_400M_clk, "pll-periph0-400M",
+ pll_periph0_2x_hws, 3, 1, 0);
+static const struct clk_hw *pll_periph0_400M_hws[] = {
+ &pll_periph0_400M_clk.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_300M_clk, "pll-periph0-300M",
+ pll_periph0_2x_hws, 4, 1, 0);
+static const struct clk_hw *pll_periph0_300M_hws[] = {
+ &pll_periph0_300M_clk.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_200M_clk, "pll-periph0-200M",
+ pll_periph0_400M_hws, 2, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_periph0_150M_clk, "pll-periph0-150M",
+ pll_periph0_300M_hws, 2, 1, 0);
+static const struct clk_hw *pll_periph0_150M_hws[] = {
+ &pll_periph0_150M_clk.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_160M_clk, "pll-periph0-160M",
+ pll_periph0_480M_hws, 3, 1, 0);
+static const struct clk_hw *pll_periph0_160M_hws[] = {
+ &pll_periph0_160M_clk.hw
+};
+
+/*
+ * The video, CSI and NPU PLLs share one layout: the 4x output divides the
+ * VCO by one or two, while the 2x and 1x outputs divide it by two and four.
+ */
+#define SUN252I_V861_PLL_VIDEO_REG 0x040
+static struct ccu_nm pll_video_8x_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_VIDEO_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video-8x",
+ osc24M, &ccu_nm_ops,
+ CLK_SET_RATE_GATE),
+ },
+};
+
+static const struct clk_hw *pll_video_8x_hws[] = {
+ &pll_video_8x_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_video_4x_clk, "pll-video-4x",
+ pll_video_8x_hws, 0x040, 0, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_video_2x_clk, "pll-video-2x",
+ pll_video_8x_hws, 2, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_video_1x_clk, "pll-video-1x",
+ pll_video_8x_hws, 4, 1, 0);
+
+#define SUN252I_V861_PLL_CSI_REG 0x048
+static struct ccu_nm pll_csi_8x_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_CSI_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-csi-8x",
+ osc24M, &ccu_nm_ops,
+ CLK_SET_RATE_GATE),
+ },
+};
+
+static const struct clk_hw *pll_csi_8x_hws[] = {
+ &pll_csi_8x_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_csi_4x_clk, "pll-csi-4x",
+ pll_csi_8x_hws, 0x048, 0, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_csi_2x_clk, "pll-csi-2x",
+ pll_csi_8x_hws, 2, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_csi_1x_clk, "pll-csi-1x",
+ pll_csi_8x_hws, 4, 1, 0);
+
+/*
+ * The audio PLL VCO feeds three output dividers. Two further dividers, in
+ * the pre-divider register at 0xe00, derive the 4x and 1x audio clocks.
+ * Their alternative fractional dividers are not used, see the probe function.
+ */
+#define SUN252I_V861_PLL_AUDIO_REG 0x078
+static struct ccu_nm pll_audio_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_AUDIO_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-audio",
+ osc24M, &ccu_nm_ops,
+ CLK_SET_RATE_GATE),
+ },
+};
+
+static const struct clk_hw *pll_audio_hws[] = {
+ &pll_audio_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_audio_div2_clk, "pll-audio-div2",
+ pll_audio_hws, 0x078, 16, 3, 0);
+static SUNXI_CCU_M_HWS(pll_audio_div3_clk, "pll-audio-div3",
+ pll_audio_hws, 0x078, 20, 3, 0);
+static SUNXI_CCU_M_HWS(pll_audio_div5_clk, "pll-audio-div5",
+ pll_audio_hws, 0x078, 2, 3, 0);
+static const struct clk_hw *pll_audio_div2_hws[] = {
+ &pll_audio_div2_clk.common.hw
+};
+
+static const struct clk_hw *pll_audio_div5_hws[] = {
+ &pll_audio_div5_clk.common.hw
+};
+
+/*
+ * The audio PLL P0 divider also feeds the UART bus clock mux, so keep audio
+ * rate changes from propagating to it.
+ */
+#define SUN252I_V861_PLL_AUDIO_PRE_DIV_REG 0xe00
+static SUNXI_CCU_M_HWS(pll_audio_4x_clk, "pll-audio-4x",
+ pll_audio_div2_hws, 0xe00, 5, 5, 0);
+static SUNXI_CCU_M_HWS(pll_audio_1x_clk, "pll-audio-1x",
+ pll_audio_div5_hws, 0xe00, 0, 5, CLK_SET_RATE_PARENT);
+
+#define SUN252I_V861_PLL_NPU_REG 0x080
+static struct ccu_nm pll_npu_8x_clk = {
+ .enable = BIT(27),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 11),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = SUN252I_V861_PLL_NPU_REG,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-npu-8x",
+ osc24M, &ccu_nm_ops,
+ CLK_SET_RATE_GATE),
+ },
+};
+
+static const struct clk_hw *pll_npu_8x_hws[] = {
+ &pll_npu_8x_clk.common.hw
+};
+
+static SUNXI_CCU_M_HWS(pll_npu_4x_clk, "pll-npu-4x",
+ pll_npu_8x_hws, 0x080, 0, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_npu_2x_clk, "pll-npu-2x",
+ pll_npu_8x_hws, 2, 1, 0);
+static CLK_FIXED_FACTOR_HWS(pll_npu_1x_clk, "pll-npu-1x",
+ pll_npu_8x_hws, 4, 1, 0);
+
+/**************************************************************************
+ * bus clocks *
+ **************************************************************************/
+
+/*
+ * The CPU subsystem clocks between 0x4fc and 0x50c, including the IPMC used
+ * for CPU power management, are left to the firmware.
+ */
+
+static const struct clk_parent_data ahb_apb_parents[] = {
+ { .fw_name = "hosc" },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(ahb_clk, "ahb", ahb_apb_parents, 0x510,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ CLK_IS_CRITICAL);
+static const struct clk_hw *ahb_hws[] = { &ahb_clk.common.hw };
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(apb0_clk, "apb0", ahb_apb_parents, 0x520,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+static const struct clk_hw *apb0_hws[] = { &apb0_clk.common.hw };
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(apb1_clk, "apb1", ahb_apb_parents, 0x524,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+static const struct clk_hw *apb1_hws[] = { &apb1_clk.common.hw };
+
+static const struct clk_parent_data apb_uart_parents[] = {
+ { .fw_name = "hosc" },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+ { .hw = &pll_audio_div2_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(apb_uart_clk, "apb-uart", apb_uart_parents,
+ 0x528,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+static const struct clk_hw *apb_uart_hws[] = { &apb_uart_clk.common.hw };
+
+/**************************************************************************
+ * mod clocks with gates *
+ **************************************************************************/
+
+static const struct clk_hw *de_g2d_parents[] = {
+ &pll_periph0_300M_clk.hw,
+ &pll_video_1x_clk.hw,
+};
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(de_clk, "de", de_g2d_parents, 0x600,
+ 0, 5, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_de_clk, "bus-de", ahb_hws, 0x60c, BIT(0), 0);
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(g2d_clk, "g2d", de_g2d_parents, 0x630,
+ 0, 5, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_g2d_clk, "bus-g2d", ahb_hws, 0x63c, BIT(0), 0);
+
+static const struct clk_parent_data ce_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_400M_clk.hw },
+ { .hw = &pll_periph0_300M_clk.hw },
+};
+
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+ 0, 4, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_ce_clk, "bus-ce", ahb_hws, 0x68c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_ce_sys_clk, "bus-ce-sys", ahb_hws, 0x68c,
+ BIT(1), 0);
+
+static const struct clk_hw *ve_parents[] = {
+ &pll_periph0_300M_clk.hw,
+ &pll_periph0_400M_clk.hw,
+ &pll_periph0_480M_clk.common.hw,
+ &pll_periph0_600M_clk.hw,
+ &pll_video_4x_clk.common.hw,
+ &pll_csi_4x_clk.common.hw,
+ &pll_audio_div3_clk.common.hw,
+};
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_ve_clk, "bus-ve", ahb_hws, 0x69c, BIT(0), 0);
+
+static const struct clk_hw *npu_parents[] = {
+ &pll_periph0_800M_clk.common.hw,
+ &pll_periph0_600M_clk.hw,
+ &pll_npu_4x_clk.common.hw,
+};
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(npu_clk, "npu", npu_parents, 0x6e0,
+ 0, 5, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_npu_clk, "bus-npu", ahb_hws, 0x6ec, BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_sgdma_clk, "bus-sgdma", ahb_hws, 0x70c,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_ndma_clk, "bus-ndma", ahb_hws, 0x70c,
+ BIT(1), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_msgbox0_clk, "bus-msgbox0", ahb_hws, 0x71c,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_msgbox1_clk, "bus-msgbox1", ahb_hws, 0x71c,
+ BIT(1), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_spinlock_clk, "bus-spinlock", ahb_hws, 0x72c,
+ BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_hstimer_clk, "bus-hstimer", ahb_hws, 0x73c,
+ BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(avs_clk, "avs", osc24M, 0x740, BIT(31), 0);
+
+/* The timer bus clock gate has its own register, apart from the reset. */
+static SUNXI_CCU_GATE_HWS(bus_timer_clk, "bus-timer", apb0_hws, 0x744,
+ BIT(31), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_dbg_clk, "bus-dbg", ahb_hws, 0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_pwm_clk, "bus-pwm", apb0_hws, 0x7ac, BIT(0), 0);
+
+static const struct clk_parent_data dram_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_ddr_clk.common.hw },
+ { .hw = &pll_periph0_2x_clk.common.hw },
+ { .hw = &pll_periph0_800M_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(dram_clk, "dram", dram_parents,
+ 0x800,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL,
+ CCU_FEATURE_UPDATE_BIT);
+
+/* MBUS runs at a quarter of the DRAM clock. */
+static CLK_FIXED_FACTOR_HW(mbus_clk, "mbus", &dram_clk.common.hw, 4, 1, 0);
+static const struct clk_hw *mbus_hws[] = { &mbus_clk.hw };
+
+static SUNXI_CCU_GATE_HWS(mbus_dma_clk, "mbus-dma", mbus_hws,
+ 0x804, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(mbus_ve_clk, "mbus-ve", mbus_hws,
+ 0x804, BIT(1), 0);
+static SUNXI_CCU_GATE_HWS(mbus_ce_clk, "mbus-ce", mbus_hws,
+ 0x804, BIT(2), 0);
+static SUNXI_CCU_GATE_HWS(mbus_csi_clk, "mbus-csi", mbus_hws,
+ 0x804, BIT(8), 0);
+static SUNXI_CCU_GATE_HWS(mbus_isp_clk, "mbus-isp", mbus_hws,
+ 0x804, BIT(9), 0);
+static SUNXI_CCU_GATE_HWS(mbus_g2d_clk, "mbus-g2d", mbus_hws,
+ 0x804, BIT(10), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_dram_clk, "bus-dram", ahb_hws, 0x80c,
+ BIT(0), CLK_IS_CRITICAL);
+
+/*
+ * The MMC controllers use timing mode 1, in which the card clock is half
+ * of the module clock, so model that with a fixed post-divider.
+ */
+static const struct clk_parent_data mmc0_mmc1_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_400M_clk.hw },
+ { .hw = &pll_periph0_300M_clk.hw },
+ { .hw = &pll_video_4x_clk.common.hw },
+ { .hw = &pll_ddr_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
+ mmc0_mmc1_parents, 0x830,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
+ mmc0_mmc1_parents, 0x834,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static const struct clk_parent_data mmc2_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+ { .hw = &pll_periph0_800M_clk.common.hw },
+ { .hw = &pll_video_4x_clk.common.hw },
+ { .hw = &pll_ddr_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
+ mmc2_parents, 0x838,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_mmc0_clk, "bus-mmc0", ahb_hws, 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_mmc1_clk, "bus-mmc1", ahb_hws, 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE_HWS(bus_mmc2_clk, "bus-mmc2", ahb_hws, 0x84c, BIT(2), 0);
+
+static const struct clk_parent_data psram_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_480M_clk.common.hw },
+ { .hw = &pll_periph0_400M_clk.hw },
+ { .hw = &pll_periph0_300M_clk.hw },
+};
+
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(psram_clk, "psram", psram_parents, 0x850,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_psram_clk, "bus-psram", ahb_hws, 0x85c,
+ BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_uart0_clk, "bus-uart0", apb_uart_hws, 0x90c,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_uart1_clk, "bus-uart1", apb_uart_hws, 0x90c,
+ BIT(1), 0);
+static SUNXI_CCU_GATE_HWS(bus_uart2_clk, "bus-uart2", apb_uart_hws, 0x90c,
+ BIT(2), 0);
+static SUNXI_CCU_GATE_HWS(bus_uart3_clk, "bus-uart3", apb_uart_hws, 0x90c,
+ BIT(3), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_i2c0_clk, "bus-i2c0", apb1_hws, 0x91c,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_i2c1_clk, "bus-i2c1", apb1_hws, 0x91c,
+ BIT(1), 0);
+static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws, 0x91c,
+ BIT(2), 0);
+static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws, 0x91c,
+ BIT(3), 0);
+
+static const struct clk_parent_data spi_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_300M_clk.hw },
+ { .hw = &pll_periph0_200M_clk.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi0_clk, "spi0", spi_parents, 0x940,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi1_clk, "spi1", spi_parents, 0x944,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi2_clk, "spi2", spi_parents, 0x948,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data spif_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_periph0_400M_clk.hw },
+ { .hw = &pll_periph0_300M_clk.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spif_clk, "spif", spif_parents, 0x950,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_spi0_clk, "bus-spi0", ahb_hws, 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_spi1_clk, "bus-spi1", ahb_hws, 0x96c, BIT(1), 0);
+static SUNXI_CCU_GATE_HWS(bus_spi2_clk, "bus-spi2", ahb_hws, 0x96c, BIT(2), 0);
+static SUNXI_CCU_GATE_HWS(bus_spif_clk, "bus-spif", ahb_hws, 0x96c, BIT(4), 0);
+
+static SUNXI_CCU_GATE_HWS_WITH_PREDIV(gmac_25M_clk, "gmac-25M",
+ pll_periph0_150M_hws,
+ 0x970, BIT(31) | BIT(30), 6, 0);
+static SUNXI_CCU_GATE_HWS(bus_gmac_clk, "bus-gmac", ahb_hws, 0x97c,
+ BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_gpadc_clk, "bus-gpadc", apb0_hws, 0x9ec,
+ BIT(0), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_ths_clk, "bus-ths", apb0_hws, 0x9fc, BIT(0), 0);
+
+static const struct clk_hw *audio_parents[] = {
+ &pll_audio_1x_clk.common.hw,
+ &pll_audio_4x_clk.common.hw,
+};
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(i2s0_clk, "i2s0", audio_parents, 0xa10,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_HWS(bus_i2s0_clk, "bus-i2s0", apb0_hws, 0xa2c,
+ BIT(0), 0);
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
+ audio_parents, 0xa50,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
+ audio_parents, 0xa54,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_HWS(bus_audio_codec_clk, "bus-audio-codec", apb0_hws,
+ 0xa5c, BIT(0), 0);
+
+/*
+ * The first two parents provide 12 MHz, from a 48 MHz clock synchronized by
+ * pll-periph0 and from the 24 MHz oscillator.
+ */
+static const struct clk_parent_data usb_ohci_parents[] = {
+ { .hw = &pll_periph0_4x_clk.common.hw },
+ { .fw_name = "hosc" },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+};
+
+static const struct ccu_mux_fixed_prediv usb_ohci_predivs[] = {
+ { .index = 0, .div = 200 },
+ { .index = 1, .div = 2 },
+};
+
+static struct ccu_mux usb_ohci0_clk = {
+ .enable = BIT(31),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = usb_ohci_predivs,
+ .n_predivs = ARRAY_SIZE(usb_ohci_predivs),
+ },
+ .common = {
+ .reg = 0xa70,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS_DATA("usb-ohci0",
+ usb_ohci_parents,
+ &ccu_mux_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE_HWS(bus_ohci0_clk, "bus-ohci0", ahb_hws, 0xa8c,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_ehci0_clk, "bus-ehci0", ahb_hws, 0xa8c,
+ BIT(4), 0);
+static SUNXI_CCU_GATE_HWS(bus_otg_clk, "bus-otg", ahb_hws, 0xa8c, BIT(8), 0);
+
+static SUNXI_CCU_GATE_HWS(bus_dpss_top_clk, "bus-dpss-top", ahb_hws, 0xabc,
+ BIT(0), 0);
+
+static const struct clk_hw *tcon_lcd_parents[] = {
+ &pll_video_4x_clk.common.hw,
+ &pll_periph0_2x_clk.common.hw,
+ &pll_csi_4x_clk.common.hw,
+};
+
+static SUNXI_CCU_MP_HW_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd",
+ tcon_lcd_parents, 0xb60,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_HWS(bus_tcon_lcd_clk, "bus-tcon-lcd", ahb_hws, 0xb7c,
+ BIT(0), 0);
+
+static const struct clk_hw *csi_parents[] = {
+ &pll_periph0_300M_clk.hw,
+ &pll_periph0_400M_clk.hw,
+ &pll_video_4x_clk.common.hw,
+ &pll_csi_4x_clk.common.hw,
+};
+
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(csi_clk, "csi", csi_parents, 0xc04,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data csi_mclk_parents[] = {
+ { .fw_name = "hosc" },
+ { .hw = &pll_csi_4x_clk.common.hw },
+ { .hw = &pll_video_4x_clk.common.hw },
+ { .hw = &pll_periph0_2x_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(csi_mclk0_clk, "csi-mclk0",
+ csi_mclk_parents, 0xc08,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(csi_mclk1_clk, "csi-mclk1",
+ csi_mclk_parents, 0xc0c,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(csi_mclk2_clk, "csi-mclk2",
+ csi_mclk_parents, 0xc10,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE_HWS(bus_csi_clk, "bus-csi", ahb_hws, 0xc2c, BIT(0), 0);
+
+/* The E907 clocks between 0xd00 and 0xd0c are left to the firmware. */
+
+static SUNXI_CCU_GATE_DATA(fanout_24M_clk, "fanout-24M", osc24M,
+ 0xf30, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA_WITH_PREDIV(fanout_12M_clk, "fanout-12M", osc24M,
+ 0xf30, BIT(1), 2, 0);
+
+static SUNXI_CCU_GATE_HWS_WITH_PREDIV(fanout_16M_clk, "fanout-16M",
+ pll_periph0_160M_hws,
+ 0xf30, BIT(2), 10, 0);
+static SUNXI_CCU_GATE_HWS_WITH_PREDIV(fanout_25M_clk, "fanout-25M",
+ pll_periph0_150M_hws,
+ 0xf30, BIT(3), 6, 0);
+
+static const struct clk_parent_data fanout_27M_parents[] = {
+ { .hw = &pll_video_1x_clk.hw },
+ { .hw = &pll_csi_1x_clk.hw },
+ { .hw = &pll_periph0_300M_clk.hw },
+};
+
+/* Unlike in the A523, the second divider is a power of two. */
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(fanout_27M_clk, "fanout-27M",
+ fanout_27M_parents, 0xf34,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data fanout_pclk_parents[] = {
+ { .hw = &apb0_clk.common.hw }
+};
+
+static SUNXI_CCU_DUALDIV_MUX_GATE(fanout_pclk_clk, "fanout-pclk",
+ fanout_pclk_parents, 0xf38,
+ 0, 5, /* div0 */
+ 5, 5, /* div1 */
+ 0, 0, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data fanout_parents[] = {
+ { .fw_name = "losc" },
+ { .hw = &fanout_12M_clk.common.hw, },
+ { .hw = &fanout_16M_clk.common.hw, },
+ { .hw = &fanout_24M_clk.common.hw, },
+ { .hw = &fanout_25M_clk.common.hw, },
+ { .hw = &fanout_27M_clk.common.hw, },
+ { .hw = &fanout_pclk_clk.common.hw, },
+};
+
+static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout0_clk, "fanout0", fanout_parents,
+ 0xf3c,
+ 0, 3, /* mux */
+ BIT(21), /* gate */
+ 0);
+static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout1_clk, "fanout1", fanout_parents,
+ 0xf3c,
+ 3, 3, /* mux */
+ BIT(22), /* gate */
+ 0);
+static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout2_clk, "fanout2", fanout_parents,
+ 0xf3c,
+ 6, 3, /* mux */
+ BIT(23), /* gate */
+ 0);
+
+static struct ccu_common *sun252i_v861_ccu_clks[] = {
+ &pll_ddr_clk.common,
+ &pll_periph0_4x_clk.common,
+ &pll_periph0_2x_clk.common,
+ &pll_periph0_800M_clk.common,
+ &pll_periph0_480M_clk.common,
+ &pll_video_8x_clk.common,
+ &pll_video_4x_clk.common,
+ &pll_csi_8x_clk.common,
+ &pll_csi_4x_clk.common,
+ &pll_audio_clk.common,
+ &pll_audio_div2_clk.common,
+ &pll_audio_div3_clk.common,
+ &pll_audio_div5_clk.common,
+ &pll_audio_4x_clk.common,
+ &pll_audio_1x_clk.common,
+ &pll_npu_8x_clk.common,
+ &pll_npu_4x_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &apb_uart_clk.common,
+ &de_clk.common,
+ &bus_de_clk.common,
+ &g2d_clk.common,
+ &bus_g2d_clk.common,
+ &ce_clk.common,
+ &bus_ce_clk.common,
+ &bus_ce_sys_clk.common,
+ &ve_clk.common,
+ &bus_ve_clk.common,
+ &npu_clk.common,
+ &bus_npu_clk.common,
+ &bus_sgdma_clk.common,
+ &bus_ndma_clk.common,
+ &bus_msgbox0_clk.common,
+ &bus_msgbox1_clk.common,
+ &bus_spinlock_clk.common,
+ &bus_hstimer_clk.common,
+ &avs_clk.common,
+ &bus_timer_clk.common,
+ &bus_dbg_clk.common,
+ &bus_pwm_clk.common,
+ &dram_clk.common,
+ &mbus_dma_clk.common,
+ &mbus_ve_clk.common,
+ &mbus_ce_clk.common,
+ &mbus_csi_clk.common,
+ &mbus_isp_clk.common,
+ &mbus_g2d_clk.common,
+ &bus_dram_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &psram_clk.common,
+ &bus_psram_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spif_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_spi2_clk.common,
+ &bus_spif_clk.common,
+ &gmac_25M_clk.common,
+ &bus_gmac_clk.common,
+ &bus_gpadc_clk.common,
+ &bus_ths_clk.common,
+ &i2s0_clk.common,
+ &bus_i2s0_clk.common,
+ &audio_codec_dac_clk.common,
+ &audio_codec_adc_clk.common,
+ &bus_audio_codec_clk.common,
+ &usb_ohci0_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_otg_clk.common,
+ &bus_dpss_top_clk.common,
+ &tcon_lcd_clk.common,
+ &bus_tcon_lcd_clk.common,
+ &csi_clk.common,
+ &csi_mclk0_clk.common,
+ &csi_mclk1_clk.common,
+ &csi_mclk2_clk.common,
+ &bus_csi_clk.common,
+ &fanout_24M_clk.common,
+ &fanout_12M_clk.common,
+ &fanout_16M_clk.common,
+ &fanout_25M_clk.common,
+ &fanout_27M_clk.common,
+ &fanout_pclk_clk.common,
+ &fanout0_clk.common,
+ &fanout1_clk.common,
+ &fanout2_clk.common,
+};
+
+static struct clk_hw_onecell_data sun252i_v861_hw_clks = {
+ .num = CLK_FANOUT2 + 1,
+ .hws = {
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.common.hw,
+ [CLK_PLL_PERIPH0_800M] = &pll_periph0_800M_clk.common.hw,
+ [CLK_PLL_PERIPH0_480M] = &pll_periph0_480M_clk.common.hw,
+ [CLK_PLL_PERIPH0_600M] = &pll_periph0_600M_clk.hw,
+ [CLK_PLL_PERIPH0_400M] = &pll_periph0_400M_clk.hw,
+ [CLK_PLL_PERIPH0_300M] = &pll_periph0_300M_clk.hw,
+ [CLK_PLL_PERIPH0_200M] = &pll_periph0_200M_clk.hw,
+ [CLK_PLL_PERIPH0_160M] = &pll_periph0_160M_clk.hw,
+ [CLK_PLL_PERIPH0_150M] = &pll_periph0_150M_clk.hw,
+ [CLK_PLL_VIDEO_8X] = &pll_video_8x_clk.common.hw,
+ [CLK_PLL_VIDEO_4X] = &pll_video_4x_clk.common.hw,
+ [CLK_PLL_VIDEO_2X] = &pll_video_2x_clk.hw,
+ [CLK_PLL_VIDEO_1X] = &pll_video_1x_clk.hw,
+ [CLK_PLL_CSI_8X] = &pll_csi_8x_clk.common.hw,
+ [CLK_PLL_CSI_4X] = &pll_csi_4x_clk.common.hw,
+ [CLK_PLL_CSI_2X] = &pll_csi_2x_clk.hw,
+ [CLK_PLL_CSI_1X] = &pll_csi_1x_clk.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
+ [CLK_PLL_AUDIO_DIV2] = &pll_audio_div2_clk.common.hw,
+ [CLK_PLL_AUDIO_DIV3] = &pll_audio_div3_clk.common.hw,
+ [CLK_PLL_AUDIO_DIV5] = &pll_audio_div5_clk.common.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.common.hw,
+ [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.common.hw,
+ [CLK_PLL_NPU_8X] = &pll_npu_8x_clk.common.hw,
+ [CLK_PLL_NPU_4X] = &pll_npu_4x_clk.common.hw,
+ [CLK_PLL_NPU_2X] = &pll_npu_2x_clk.hw,
+ [CLK_PLL_NPU_1X] = &pll_npu_1x_clk.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB_UART] = &apb_uart_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_G2D] = &g2d_clk.common.hw,
+ [CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_CE_SYS] = &bus_ce_sys_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_NPU] = &npu_clk.common.hw,
+ [CLK_BUS_NPU] = &bus_npu_clk.common.hw,
+ [CLK_BUS_SGDMA] = &bus_sgdma_clk.common.hw,
+ [CLK_BUS_NDMA] = &bus_ndma_clk.common.hw,
+ [CLK_BUS_MSGBOX0] = &bus_msgbox0_clk.common.hw,
+ [CLK_BUS_MSGBOX1] = &bus_msgbox1_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_BUS_TIMER] = &bus_timer_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.hw,
+ [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
+ [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
+ [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
+ [CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
+ [CLK_MBUS_ISP] = &mbus_isp_clk.common.hw,
+ [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_PSRAM] = &psram_clk.common.hw,
+ [CLK_BUS_PSRAM] = &bus_psram_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPIF] = &spif_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
+ [CLK_BUS_SPIF] = &bus_spif_clk.common.hw,
+ [CLK_GMAC_25M] = &gmac_25M_clk.common.hw,
+ [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
+ [CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_AUDIO_CODEC_DAC] = &audio_codec_dac_clk.common.hw,
+ [CLK_AUDIO_CODEC_ADC] = &audio_codec_adc_clk.common.hw,
+ [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_DPSS_TOP] = &bus_dpss_top_clk.common.hw,
+ [CLK_TCON_LCD] = &tcon_lcd_clk.common.hw,
+ [CLK_BUS_TCON_LCD] = &bus_tcon_lcd_clk.common.hw,
+ [CLK_CSI] = &csi_clk.common.hw,
+ [CLK_CSI_MCLK0] = &csi_mclk0_clk.common.hw,
+ [CLK_CSI_MCLK1] = &csi_mclk1_clk.common.hw,
+ [CLK_CSI_MCLK2] = &csi_mclk2_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_FANOUT_24M] = &fanout_24M_clk.common.hw,
+ [CLK_FANOUT_12M] = &fanout_12M_clk.common.hw,
+ [CLK_FANOUT_16M] = &fanout_16M_clk.common.hw,
+ [CLK_FANOUT_25M] = &fanout_25M_clk.common.hw,
+ [CLK_FANOUT_27M] = &fanout_27M_clk.common.hw,
+ [CLK_FANOUT_PCLK] = &fanout_pclk_clk.common.hw,
+ [CLK_FANOUT0] = &fanout0_clk.common.hw,
+ [CLK_FANOUT1] = &fanout1_clk.common.hw,
+ [CLK_FANOUT2] = &fanout2_clk.common.hw,
+ },
+};
+
+static const struct ccu_reset_map sun252i_v861_ccu_resets[] = {
+ [RST_MBUS] = { 0x540, BIT(30) },
+ [RST_BUS_DE] = { 0x60c, BIT(16) },
+ [RST_BUS_G2D] = { 0x63c, BIT(16) },
+ [RST_BUS_CE] = { 0x68c, BIT(16) },
+ [RST_BUS_CE_SYS] = { 0x68c, BIT(17) },
+ [RST_BUS_VE] = { 0x69c, BIT(16) },
+ [RST_BUS_NPU] = { 0x6ec, BIT(16) },
+ [RST_BUS_SGDMA] = { 0x70c, BIT(16) },
+ [RST_BUS_NDMA] = { 0x70c, BIT(17) },
+ [RST_BUS_MSGBOX0] = { 0x71c, BIT(16) },
+ [RST_BUS_MSGBOX1] = { 0x71c, BIT(17) },
+ [RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
+ [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
+ [RST_BUS_TIMER] = { 0x74c, BIT(16) },
+ [RST_BUS_DBG] = { 0x78c, BIT(16) },
+ [RST_BUS_PWM] = { 0x7ac, BIT(16) },
+ [RST_BUS_DRAM] = { 0x80c, BIT(16) },
+ [RST_BUS_MMC0] = { 0x84c, BIT(16) },
+ [RST_BUS_MMC1] = { 0x84c, BIT(17) },
+ [RST_BUS_MMC2] = { 0x84c, BIT(18) },
+ [RST_BUS_PSRAM] = { 0x85c, BIT(16) },
+ [RST_BUS_UART0] = { 0x90c, BIT(16) },
+ [RST_BUS_UART1] = { 0x90c, BIT(17) },
+ [RST_BUS_UART2] = { 0x90c, BIT(18) },
+ [RST_BUS_UART3] = { 0x90c, BIT(19) },
+ [RST_BUS_I2C0] = { 0x91c, BIT(16) },
+ [RST_BUS_I2C1] = { 0x91c, BIT(17) },
+ [RST_BUS_I2C2] = { 0x91c, BIT(18) },
+ [RST_BUS_I2C3] = { 0x91c, BIT(19) },
+ [RST_BUS_SPI0] = { 0x96c, BIT(16) },
+ [RST_BUS_SPI1] = { 0x96c, BIT(17) },
+ [RST_BUS_SPI2] = { 0x96c, BIT(18) },
+ [RST_BUS_SPIF] = { 0x96c, BIT(20) },
+ [RST_BUS_GMAC] = { 0x97c, BIT(16) },
+ [RST_BUS_GPADC] = { 0x9ec, BIT(16) },
+ [RST_BUS_THS] = { 0x9fc, BIT(16) },
+ [RST_BUS_I2S0] = { 0xa2c, BIT(16) },
+ [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
+ [RST_USB_PHY0] = { 0xa70, BIT(30) },
+ [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
+ [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
+ [RST_BUS_OTG] = { 0xa8c, BIT(24) },
+ [RST_BUS_DPSS_TOP] = { 0xabc, BIT(16) },
+ [RST_BUS_TCON_LCD] = { 0xb7c, BIT(16) },
+ [RST_BUS_CSI] = { 0xc2c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun252i_v861_ccu_desc = {
+ .ccu_clks = sun252i_v861_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun252i_v861_ccu_clks),
+
+ .hw_clks = &sun252i_v861_hw_clks,
+
+ .resets = sun252i_v861_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun252i_v861_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+ SUN252I_V861_PLL_DDR_REG,
+ SUN252I_V861_PLL_PERIPH0_REG,
+ SUN252I_V861_PLL_VIDEO_REG,
+ SUN252I_V861_PLL_CSI_REG,
+ SUN252I_V861_PLL_AUDIO_REG,
+ SUN252I_V861_PLL_NPU_REG,
+};
+
+static int sun252i_v861_ccu_probe(struct platform_device *pdev)
+{
+ void __iomem *reg;
+ u32 val;
+ int i;
+
+ reg = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ /*
+ * The PLL clock code does not model all bits, for instance it does
+ * not support a separate enable and gate bit. We present the
+ * gate bit(27) as the enable bit, but then have to set the
+ * PLL Enable, LDO Enable, and Lock Enable bits on all PLLs here.
+ */
+ for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+ val = readl(reg + pll_regs[i]);
+ val |= BIT(31) | BIT(30) | BIT(29);
+ writel(val, reg + pll_regs[i]);
+ }
+
+ /* Derive the 4x and 1x audio clocks from the integer PLL outputs. */
+ val = readl(reg + SUN252I_V861_PLL_AUDIO_PRE_DIV_REG);
+ val &= ~(BIT(28) | BIT(24));
+ writel(val, reg + SUN252I_V861_PLL_AUDIO_PRE_DIV_REG);
+
+ return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun252i_v861_ccu_desc);
+}
+
+static const struct of_device_id sun252i_v861_ccu_ids[] = {
+ { .compatible = "allwinner,sun252i-v861-ccu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun252i_v861_ccu_ids);
+
+static struct platform_driver sun252i_v861_ccu_driver = {
+ .probe = sun252i_v861_ccu_probe,
+ .driver = {
+ .name = "sun252i-v861-ccu",
+ .suppress_bind_attrs = true,
+ .of_match_table = sun252i_v861_ccu_ids,
+ },
+};
+module_platform_driver(sun252i_v861_ccu_driver);
+
+MODULE_IMPORT_NS("SUNXI_CCU");
+MODULE_DESCRIPTION("Support for the Allwinner V861 CCU");
+MODULE_LICENSE("GPL");
--
2.55.0
More information about the linux-riscv
mailing list