[PATCH 0/2] riscv: dts: spacemit: Add K3 CoM260 IFX TQ support

[Troy Mitchell]

This series adds device tree support for the K3 CoM260 IFX TQ board,
which combines the K3 CoM260 module with the IFX TQ carrier.

The board reuses the CoM260 module description for the UART console,
Ethernet, module EEPROM and PMIC, and describes the carrier's Ethernet
PHY LEDs. Unlike the IFX carrier, the IFX TQ carrier has no additional
EEPROM.

Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
---
Troy Mitchell (2):
      dt-bindings: riscv: spacemit: Add K3 CoM260 IFX TQ
      riscv: dts: spacemit: Add K3 CoM260 IFX TQ support

 .../devicetree/bindings/riscv/spacemit.yaml        |  1 +
 arch/riscv/boot/dts/spacemit/Makefile              |  1 +
 arch/riscv/boot/dts/spacemit/k3-com260-ifx-tq.dts  | 44 ++++++++++++++++++++++
 3 files changed, 46 insertions(+)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261015-k3-tq-dts-based-on-com260-37d5d99a2b9b

Best regards,
--  
Troy Mitchell <troy.mitchell at linux.spacemit.com>