[PATCH 1/5] riscv: dts: spacemit: k3-com260-ifx: Drop wrong SD card vmmc-supply

[Troy Mitchell]

The SD card VDD on the K3 CoM260 module comes from a fixed, always-on
3.3 V rail that software cannot control. ALDO4 of the P1 PMIC does not
supply the card, so referencing it as vmmc-supply describes the wrong
power wiring.

Drop the vmmc-supply property. It is optional for a card powered by a
fixed supply, and the SDHCI core then uses the voltages advertised by
the controller.

Fixes: 055044260e7a ("riscv: dts: spacemit: k3: Enable SD card support")
Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
index fadcf28389be..6e295bc6f196 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
@@ -122,7 +122,6 @@ &sdhci0 {
 	no-sdio;
 	disable-wp;
 	cap-sd-highspeed;
-	vmmc-supply = <&aldo4>;
 	vqmmc-supply = <&aldo1>;
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;

-- 
2.56.0