[PATCH] PCI: spacemit: Ignore PERST# bit for controllers

[Troy Mitchell]

On Wed Nov 4, 2026 at 2:07 PM GMT, Ali Tariq wrote:
> The k1_pcie_init() does not set PCIE_IGNORE_PERSTN bit of the
> control logic register, which causes controller to reset itself once
> PERST# signal is asserted even when acting as host.
> On Orange Pi RV2 (SpacemiT K1), this resets the controller and wipes
> the IDs. k1_pcie_deinit() leaves PERST# asserted, so when k1_pcie_init()
> runs again, its first DBI access hangs the CPU.
>
> Set PCIE_IGNORE_PERSTN bit of the control logic register of APMU
> in k1_pcie_init() before enabling resources so controllers
> dont end up resetting themselves when PERST# signal is asserted.
>
> Fixes: ff64e078e45f ("PCI: spacemit: Add SpacemiT PCIe host driver")
> Signed-off-by: Ali Tariq <alitariq45892 at gmail.com>
> ---
> Hang log: https://kernelci.cloud-v.co/scheduler/job/420
> Fixed Log: https://kernelci.cloud-v.co/scheduler/job/430
> ---
>  drivers/pci/controller/dwc/pcie-spacemit-k1.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> index 92a71ea90ac3..af6028e8825a 100644
> --- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> +++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> @@ -47,6 +47,7 @@
>  
>  #define PCIE_CONTROL_LOGIC			0x0004
>  #define PCIE_SOFT_RESET			BIT(0)
> +#define PCIE_IGNORE_PERSTN		BIT(2)	/* 1: ignore PERST# */
A similar but earlier patch can be found here [1]

Link: https://lore.kernel.org/all/20260924-spacemit-k1-pcie-fix-v1-1-002b5c1ba9fc@linux.spacemit.com/ [1]

-- 
Troy Mitchell

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 273 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20261104/ac69222b/attachment.sig>