[PATCH 0/2] spacemit: k3: Add support for BS01DCMA board

[Troy Mitchell]

This patch series adds initial support for the SpacemiT K3 BS01DCMA
board, which is equipped with a K3 SoC, 16 GiB of LPDDR5 memory, a P1
PMIC, an EEPROM and QSPI NOR flash.

Enable support for the serial console, EEPROM, PMIC and QSPI NOR flash.

---
Troy Mitchell (2):
      dt-bindings: riscv: spacemit: Add K3 BS01DCMA
      riscv: dts: spacemit: Add K3 BS01DCMA support

 .../devicetree/bindings/riscv/spacemit.yaml        |   1 +
 arch/riscv/boot/dts/spacemit/Makefile              |   1 +
 arch/riscv/boot/dts/spacemit/k3-bs01dcma.dts       | 266 +++++++++++++++++++++
 3 files changed, 268 insertions(+)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261104-k3-bs01dcma-467fe26c462c

Best regards,
--  
Troy Mitchell <troy.mitchell at linux.spacemit.com>