[PATCH v4 3/3] riscv: dts: canaan: Add mmc nodes for K230

[Junhui Liu]

On Tue Mar 17, 2026 at 12:03 AM CST, Jiayu Du wrote:
> On Mon, Mar 16, 2026 at 10:15:27PM +0800, Junhui Liu wrote:
>> Hi Jiayu,
>> Thanks for the new version. Just a friendly reminder.
>> 
>> On Sun Mar 15, 2026 at 1:44 PM CST, Jiayu Du wrote:
>> > Add MMC nodes to K230, including eMMC and SDIO. Enable HS200 eMMC
>> > on the SoM and SDIO high-speed on the board.
>> >
>> > Signed-off-by: Jiayu Du <jiayu.riscv at isrc.iscas.ac.cn>
>> > ---
>> >  .../boot/dts/canaan/k230-canmv-dshanpi.dts    | 56 +++++++++++++++++++
>> >  .../dts/canaan/k230-canmv-module-dshanpi.dtsi |  7 +++
>> >  arch/riscv/boot/dts/canaan/k230.dtsi          | 28 ++++++++++
>> >  3 files changed, 91 insertions(+)
>> 
>> [...]
>> 
>> > +
>> > +&sdio {
>> > +	bus-width = <4>;
>> > +	max-frequency = <50000000>;
>> > +	pinctrl-names = "default";
>> > +	pinctrl-0 = <&mmc1_pins>;
>> > +	vmmc-supply = <&vdd_3v3>;
>> > +	vqmmc-supply = <&vdd_3v3>;
>> > +	cap-sd-highspeed;
>> > +	no-1-8-v;
>> > +	status = "okay";
>> >  };
>> >  
>> 
>> It seems the broken-cd property we discussed in the previous version is
>> not added, and also my Tested-by tag (for the whole series). Was this
>> intentional or just an oversight?
>> 
>
> Sorry for that, It was a oversight. I will fix both.
>
> And I will only add your Tested-by tags to patch [2/3] and [3/3].
> Is this correct?

That's fine, Thanks.

-- 
Best regards,
Junhui Liu