[PATCH v3 1/2] dt-bindings: hwmon: moortec,mr75203: adapt multipleOf for T-Head TH1520

Guenter Roeck linux at roeck-us.net
Mon Mar 16 07:13:24 PDT 2026


On 3/16/26 04:09, Conor Dooley wrote:
> On Sun, Mar 15, 2026 at 08:44:02AM -0700, Drew Fustini wrote:
>> On Sun, Mar 15, 2026 at 12:12:13PM +0000, Conor Dooley wrote:
>>> On Sat, Mar 14, 2026 at 09:56:27AM -0700, Drew Fustini wrote:
>>>> On Tue, Mar 10, 2026 at 12:24:56AM +0800, Icenowy Zheng wrote:
>>>>> The G and J coefficients provided by T-Head TH1520 manual (which calls
>>>>> them A and C coefficients and calls H coefficient in the binding as B)
>>>>> have 1/100 degree Celsius precision (the values are 42.74 and -0.16
>>>>> respectively), however the binding currently only allows coefficients as
>>>>> precise as 100 milli-Celsius (1/10 degree Celsius).
>>>>>
>>>>> Change the multipleOf value of these two coefficients to 10 (in the unit
>>>>> of milli-Celsius) to satisfy the need of TH1520.
>>>>>
>>>>> Signed-off-by: Icenowy Zheng <zhengxingda at iscas.ac.cn>
>>>>> Reviewed-by: Drew Fustini <fustini at kernel.org>
>>>>> ---
>>>>> Changes in v3:
>>>>> - Added Drew's R-b.
>>>>> - Fixed some typos in the commit message and slightly reworded the
>>>>>    precision sentence.
>>>>>
>>>>>   Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 4 ++--
>>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
>>>>> index 56db2292f062d..7d57c2934a8a1 100644
>>>>> --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
>>>>> +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
>>>>> @@ -105,7 +105,7 @@ properties:
>>>>>         G coefficient for temperature equation.
>>>>>         Default for series 5 = 60000
>>>>>         Default for series 6 = 57400
>>>>> -    multipleOf: 100
>>>>> +    multipleOf: 10
>>>>>       minimum: 1000
>>>>>       $ref: /schemas/types.yaml#/definitions/uint32
>>>>>   
>>>>> @@ -131,7 +131,7 @@ properties:
>>>>>         J coefficient for temperature equation.
>>>>>         Default for series 5 = -100
>>>>>         Default for series 6 = 0
>>>>> -    multipleOf: 100
>>>>> +    multipleOf: 10
>>>>>       maximum: 0
>>>>>       $ref: /schemas/types.yaml#/definitions/int32
>>>>>   
>>>>> -- 
>>>>> 2.52.0
>>>>>
>>>>
>>>> I have applied this to thead-dt-for-next.
>>>
>>> That's odd, why is a hwmon binding in your branch?
>>>
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux.git/commit/?h=thead-dt-for-next&id=eb4fd43ff6793681f0a0a8e8ac861142caba2b19
>>>
>>> I don't see an ack on it from the relevant maintainer either?
>>
>> Sorry, my mistake, I should not have applied the binding. And you are
>> right to point out that there was no ack from Guenter or Rahul Tanwar.
> 
> It was Guenter I was thinking of, but there's not one from myself, Rob
> or Krzysztof either.
> 

... which is why I didn't apply it yet.

Guenter

>> I will drop both patches from thead-dt-for-next and wait for agreement
>> on the binding.
>>
>> Thanks,
>> Drew
> 
> 




More information about the linux-riscv mailing list