[PATCH 1/2] dt-bindings: soc: spacemit: k3: Decouple composite reset lines

[Yixun Lan]

Hi Conor,

On 17:30 Thu 12 Mar     , Conor Dooley wrote:
> On Thu, Mar 12, 2026 at 07:28:58PM +0800, Yixun Lan wrote:
> > Hi Philipp,
> > 
> > On 12:09 Thu 12 Mar     , Philipp Zabel wrote:
> > > On Do, 2026-03-12 at 10:34 +0000, Yixun Lan wrote:
> > > > Instead of grouping several different reset lines into one composite
> > > > reset, decouple them to individual ones which make it more aligned
> > > > with underlying hardware.
> > > >
> > > > The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
> > > > PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
> > > > 
> > > > Signed-off-by: Yixun Lan <dlan at kernel.org>
> > > > ---
> > > >  include/dt-bindings/reset/spacemit,k3-resets.h | 42 ++++++++++++++++++++------
> > > >  1 file changed, 32 insertions(+), 10 deletions(-)
> > > > 
> > > > diff --git a/include/dt-bindings/reset/spacemit,k3-resets.h b/include/dt-bindings/reset/spacemit,k3-resets.h
> > > > index 79ac1c22b7b5..c12f8bd32047 100644
> > > > --- a/include/dt-bindings/reset/spacemit,k3-resets.h
> > > > +++ b/include/dt-bindings/reset/spacemit,k3-resets.h
> > > > @@ -97,11 +97,7 @@
> > > >  #define RESET_APMU_SDH0          13
> > > >  #define RESET_APMU_SDH1          14
> > > >  #define RESET_APMU_SDH2          15
> > > > -#define RESET_APMU_USB2          16
> > > > -#define RESET_APMU_USB3_PORTA    17
> > > > -#define RESET_APMU_USB3_PORTB    18
> > > > -#define RESET_APMU_USB3_PORTC    19
> > > > -#define RESET_APMU_USB3_PORTD    20
> > > 
> > > This is backwards incompatible.
> > > Are there any device trees using the APMU resets yet?
> > > If not, I wonder if we should just renumber all APMU resets into a
> > > contiguous range and try to get it into v7.0 as a fix.
> > > 
> > No, there is currently no consumers, so I could rework them into a contiguous
> > version, thanks for the suggestion
> 
> Only as long as it goes into 7.0, IMO, as a fix.
> 
Yes, that's the plan

In this case, I would change my mind to add a Fixes tag explicitly(shouldn't hurt!)

> > > Also, this breaks bisectability.
> > > reset-spacemit-k3.c will fail to compile between patches 1 and 2.
> > > 
> > I've tried a first version to squash the two patches, but got a checkpatch.pl complait
> > for binding should follow into a separate patch.
> > 
> > I can combine these two patches into one, is this Ok for you?
> 
> Be very very very clear about why they're going together, otherwise you'll
> get yelled at!
Ok, will add comment for this, thanks for the tip.

-- 
Yixun Lan (dlan)