[PATCH RFC 5/8] clk: sunxi-ng: a733: Add bus clocks support
Junhui Liu
junhui.liu at pigmoral.tech
Tue Mar 10 01:33:58 PDT 2026
Add the essential bus clocks in the Allwinner A733 CCU, including AHB,
APB0, APB1, APB_UART, NSI, and MBUS. These buses are necessary for many
other functional modules. Additionally clocks such as trace, gic and
cpu_peri are also added as they fall within the register address range
of the bus clocks, even though they are not strictly bus clocks.
The MBUS clock is marked as critical to ensure the memory bus remains
operational at all times. For the NSI and MBUS clocks, the hardware
requires an update bit (bit 27) to be set so that the configuration
takes effect and the updated parameters can be correctly read back.
Signed-off-by: Junhui Liu <junhui.liu at pigmoral.tech>
---
drivers/clk/sunxi-ng/ccu-sun60i-a733.c | 131 +++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun60i-a733.c b/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
index cf819504c51f..68457813dbbb 100644
--- a/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
+++ b/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
@@ -19,6 +19,7 @@
#include "ccu_common.h"
#include "ccu_div.h"
+#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
@@ -65,6 +66,16 @@ static const struct clk_hw *pll_ref_hws[] = {
&pll_ref_clk.common.hw
};
+/*
+ * There is a non-software-configurable mux selecting between the DCXO and the
+ * PLL_REF in hardware, whose output is fed to the sys-24M clock. Although both
+ * sys-24M and pll-ref are fixed at 24 MHz, define a 1:1 fixed factor clock to
+ * provide logical separation:
+ * - pll-ref is dedicated to feeding other PLLs
+ * - sys-24M serves as reference clock for downstream functional modules
+ */
+static CLK_FIXED_FACTOR_HWS(sys_24M_clk, "sys-24M", pll_ref_hws, 1, 1, 0);
+
#define SUN60I_A733_PLL_DDR_REG 0x020
static struct ccu_nkmp pll_ddr_clk = {
.enable = BIT(27),
@@ -371,6 +382,107 @@ static SUNXI_CCU_M_HWS(pll_de_4x_clk, "pll-de-4x", pll_de_hws,
static SUNXI_CCU_M_HWS(pll_de_3x_clk, "pll-de-3x", pll_de_hws,
SUN60I_A733_PLL_DE_REG, 16, 3, 0);
+/**************************************************************************
+ * bus clocks *
+ **************************************************************************/
+
+static const struct clk_parent_data ahb_apb_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+};
+
+static SUNXI_CCU_M_DATA_WITH_MUX(ahb_clk, "ahb", ahb_apb_parents, 0x500,
+ 0, 5, /* M */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_M_DATA_WITH_MUX(apb0_clk, "apb0", ahb_apb_parents, 0x510,
+ 0, 5, /* M */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_M_DATA_WITH_MUX(apb1_clk, "apb1", ahb_apb_parents, 0x518,
+ 0, 5, /* M */
+ 24, 2, /* mux */
+ 0);
+
+static const struct clk_parent_data apb_uart_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+ { .hw = &pll_periph0_480M_clk.common.hw },
+};
+static SUNXI_CCU_M_DATA_WITH_MUX(apb_uart_clk, "apb-uart", apb_uart_parents, 0x538,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ 0);
+
+static const struct clk_parent_data trace_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .hw = &pll_periph0_300M_clk.hw },
+ { .hw = &pll_periph0_400M_clk.hw },
+};
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(trace_clk, "trace", trace_parents, 0x540,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data gic_cpu_peri_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .fw_name = "losc" },
+ { .hw = &pll_periph0_600M_clk.hw },
+ { .hw = &pll_periph0_480M_clk.common.hw },
+ { .hw = &pll_periph0_400M_clk.hw },
+};
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(gic_clk, "gic", gic_cpu_peri_parents, 0x560,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(cpu_peri_clk, "cpu-peri", gic_cpu_peri_parents, 0x568,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const struct clk_parent_data nsi_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .hw = &pll_ddr_clk.common.hw },
+ { .hw = &pll_periph0_800M_clk.common.hw },
+ { .hw = &pll_periph0_600M_clk.hw },
+ { .hw = &pll_periph0_480M_clk.common.hw },
+ { .hw = &pll_de_3x_clk.common.hw },
+};
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(nsi_clk, "nsi", nsi_parents, 0x580,
+ 0, 5, /* M */
+ 0, 0, /* no P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0, CCU_FEATURE_UPDATE_BIT);
+
+static const struct clk_parent_data mbus_parents[] = {
+ { .hw = &sys_24M_clk.hw },
+ { .hw = &pll_periph1_600M_clk.hw },
+ { .hw = &pll_ddr_clk.common.hw },
+ { .hw = &pll_periph1_480M_clk.common.hw },
+ { .hw = &pll_periph1_400M_clk.hw },
+ { .hw = &pll_npu_clk.common.hw },
+};
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(mbus_clk, "mbus", mbus_parents, 0x588,
+ 0, 5, /* M */
+ 0, 0, /* no P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL,
+ CCU_FEATURE_UPDATE_BIT);
+
/*
* Contains all clocks that are controlled by a hardware register. They
* have a (sunxi) .common member, which needs to be initialised by the common
@@ -407,11 +519,21 @@ static struct ccu_common *sun60i_a733_ccu_clks[] = {
&pll_de_clk.common,
&pll_de_4x_clk.common,
&pll_de_3x_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &apb_uart_clk.common,
+ &trace_clk.common,
+ &gic_clk.common,
+ &cpu_peri_clk.common,
+ &nsi_clk.common,
+ &mbus_clk.common,
};
static struct clk_hw_onecell_data sun60i_a733_hw_clks = {
.hws = {
[CLK_PLL_REF] = &pll_ref_clk.common.hw,
+ [CLK_SYS_24M] = &sys_24M_clk.hw,
[CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
[CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.common.hw,
@@ -453,6 +575,15 @@ static struct clk_hw_onecell_data sun60i_a733_hw_clks = {
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_DE_4X] = &pll_de_4x_clk.common.hw,
[CLK_PLL_DE_3X] = &pll_de_3x_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB_UART] = &apb_uart_clk.common.hw,
+ [CLK_TRACE] = &trace_clk.common.hw,
+ [CLK_GIC] = &gic_clk.common.hw,
+ [CLK_CPU_PERI] = &cpu_peri_clk.common.hw,
+ [CLK_NSI] = &nsi_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
},
.num = CLK_FANOUT3 + 1,
};
--
2.52.0
More information about the linux-riscv
mailing list