[PATCH v2 1/1] riscv: dts: spacemit: Add 'linux,pci-domain' to PCIe nodes for K1
Yixun Lan
dlan at kernel.org
Mon Mar 9 03:51:56 PDT 2026
Hi Chukun,
On 11:00 Mon 09 Mar , Chukun Pan wrote:
> The SpacemiT K1 SoC has 3 PCIe EP controller nodes. Add the
> 'linux,pci-domain' property to assign a PCI domain number to
> each of the controllers instead of assigning it randomly.
>
> This creates a stable sysfs path, allowing userspace scripts
> to reliably target specific PCIe devices (such as PCIe NICs).
>
> Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
Looks good to me
Reviewed-by: Yixun Lan <dlan at kernel.org>
> ---
> Changes in v2:
> - Improve the commit messages
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 529ec68e9c23..d2015201f8e5 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -1033,6 +1033,7 @@ pcie-bus {
> #size-cells = <2>;
> dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
> <0x0 0xb8000000 0x1 0x38000000 0x3 0x48000000>;
> +
> pcie0: pcie at ca000000 {
> device_type = "pci";
> compatible = "spacemit,k1-pcie";
> @@ -1044,6 +1045,7 @@ pcie0: pcie at ca000000 {
> "atu",
> "config",
> "link";
> + linux,pci-domain = <0>;
> #address-cells = <3>;
> #size-cells = <2>;
> ranges = <0x01000000 0x0 0x00000000 0x0 0x8f002000 0x0 0x00100000>,
> @@ -1087,6 +1089,7 @@ pcie1: pcie at ca400000 {
> "atu",
> "config",
> "link";
> + linux,pci-domain = <1>;
> #address-cells = <3>;
> #size-cells = <2>;
> ranges = <0x01000000 0x0 0x00000000 0x0 0x9f002000 0x0 0x00100000>,
> @@ -1130,6 +1133,7 @@ pcie2: pcie at ca800000 {
> "atu",
> "config",
> "link";
> + linux,pci-domain = <2>;
> #address-cells = <3>;
> #size-cells = <2>;
> ranges = <0x01000000 0x0 0x00000000 0x0 0xb7002000 0x0 0x00100000>,
> --
> 2.25.1
>
--
Yixun Lan (dlan)
More information about the linux-riscv
mailing list