[PATCH v1] dt-bindings: i2c: microchip,corei2c: permit resets

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

Both CoreI2C and the hardened versions of it on mpfs and pic64gx have a
reset pin. For the former, usually this is wired to a common fabric
reset not managed by software and for the latter two the platform
firmware takes them out of reset on first-party boards (or those using
modified versions of the vendor firmware), but not all boards may take
this approach. Permit providing a reset in devicetree for Linux, or
other devicetree-consuming software, to use.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
CC: Conor Dooley <conor.dooley at microchip.com>
CC: Daire McNamara <daire.mcnamara at microchip.com>
CC: Andi Shyti <andi.shyti at kernel.org>
CC: Rob Herring <robh at kernel.org>
CC: Krzysztof Kozlowski <krzk+dt at kernel.org>
CC: linux-riscv at lists.infradead.org
CC: linux-i2c at vger.kernel.org
CC: devicetree at vger.kernel.org
CC: linux-kernel at vger.kernel.org
---
 Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
index 6ff58b64d4962..bd63c70aac6bc 100644
--- a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -37,6 +37,9 @@ properties:
       modes are supported, possible values are 100000 and 400000.
     enum: [100000, 400000]
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
-- 
2.51.0