[PATCH 09/10] riscv: dts: spacemit: k1-orangepi-rv2: add PMIC and power infrastructure
Iker Pedrosa
ikerpedrosam at gmail.com
Mon Mar 2 07:13:30 PST 2026
Add Spacemit P1 PMIC configuration and board power infrastructure for
voltage regulation support.
- Add board power regulators (12V input, 4V rail)
- Enable I2C8 for PMIC communication
- Configure PMIC with buck4 (vmmc) and aldo1 (vqmmc) regulators
- Set up regulator constraints for SD card operation
Signed-off-by: Iker Pedrosa <ikerpedrosam at gmail.com>
---
arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts | 48 ++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index 7b7331cb3c726f11d597f81917f3a3f5fc21e1b9..414b03f5e6480f05f5d7eeaaa0afb4e86425ae36 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -19,6 +19,25 @@ aliases {
ethernet1 = ð1;
};
+ reg_dc_in: dc-in-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_in_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vcc_4v: vcc-4v {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_4v";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ vin-supply = <®_dc_in>;
+ };
+
chosen {
stdout-path = "serial0";
};
@@ -92,3 +111,32 @@ &uart0 {
pinctrl-0 = <&uart0_2_cfg>;
status = "okay";
};
+
+&i2c8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_cfg>;
+ status = "okay";
+
+ pmic at 41 {
+ compatible = "spacemit,p1";
+ reg = <0x41>;
+ interrupts = <64>;
+ vin-supply = <®_vcc_4v>;
+
+ regulators {
+ sd_vmmc: buck4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ sd_vqmmc: aldo1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
--
2.53.0
More information about the linux-riscv
mailing list