[PATCH net-next v2 1/8] riscv: dts: microchip: add tsu clock to macb on mpfs

[Conor Dooley]

On Thu, Feb 26, 2026 at 11:03:16AM +0000, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley at microchip.com>
> 
> In increment mode, the tsu clock for the macb is provided separately to
> the pck, usually the same clock as the reference to the rtc provided by
> an off-chip oscillator. pclk is 150 MHz typically, and the reference is
> either 100 MHz or 125 MHz, so having the tsu clock is required for
> correct rate selection.
> 
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> ---
>  arch/riscv/boot/dts/microchip/Makefile.orig | 26 +++++++++++++++++++++

Of course I noticed this only after sending, but this patch isn't for
net anyway so it's kinda moot and I could fix it myself on application
or in the likely v3.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20260226/3a41a65e/attachment.sig>