[PATCH v2 3/3] phy: k1-usb: k3: add USB2 PHY support

[Yixun Lan]

Add USB2 PHY support for SpacemiT K3 SoC.

Register layout of handling USB disconnect operation has been changed,
So introducing a platform data to distinguish the different SoCs.

Signed-off-by: Yixun Lan <dlan at kernel.org>
---
 drivers/phy/spacemit/phy-k1-usb2.c | 34 +++++++++++++++++++++++++++++-----
 1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 959bf79c7a72..b4ba97481ddd 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -51,6 +51,9 @@
 #define PHY_K1_HS_HOST_DISC		0x40
 #define  PHY_K1_HS_HOST_DISC_CLR		BIT(0)
 
+#define PHY_K3_HS_HOST_DISC		0x20
+#define  PHY_K3_HS_HOST_DISC_CLR		BIT(8)
+
 #define PHY_PLL_DIV_CFG			0x98
 #define  PHY_FDIV_FRACT_8_15		GENMASK(7, 0)
 #define  PHY_FDIV_FRACT_16_19		GENMASK(11, 8)
@@ -145,7 +148,7 @@ static int spacemit_usb2phy_exit(struct phy *phy)
 	return 0;
 }
 
-static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
+static int spacemit_k1_usb2phy_disconnect(struct phy *phy, int port)
 {
 	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
 
@@ -155,10 +158,27 @@ static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
 	return 0;
 }
 
-static const struct phy_ops spacemit_usb2phy_ops = {
+static int spacemit_k3_usb2phy_disconnect(struct phy *phy, int port)
+{
+	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
+
+	regmap_update_bits(sphy->regmap_base, PHY_K3_HS_HOST_DISC,
+					   PHY_K3_HS_HOST_DISC_CLR, PHY_K3_HS_HOST_DISC_CLR);
+
+	return 0;
+}
+
+static const struct phy_ops spacemit_k1_usb2phy_ops = {
 	.init = spacemit_usb2phy_init,
 	.exit = spacemit_usb2phy_exit,
-	.disconnect = spacemit_usb2phy_disconnect,
+	.disconnect = spacemit_k1_usb2phy_disconnect,
+	.owner = THIS_MODULE,
+};
+
+static const struct phy_ops spacemit_k3_usb2phy_ops = {
+	.init = spacemit_usb2phy_init,
+	.exit = spacemit_usb2phy_exit,
+	.disconnect = spacemit_k3_usb2phy_disconnect,
 	.owner = THIS_MODULE,
 };
 
@@ -167,12 +187,15 @@ static int spacemit_usb2phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct spacemit_usb2phy *sphy;
+	const struct phy_ops *ops;
 	void __iomem *base;
 
 	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
 	if (!sphy)
 		return -ENOMEM;
 
+	ops = device_get_match_data(dev);
+
 	sphy->clk = devm_clk_get_prepared(&pdev->dev, NULL);
 	if (IS_ERR(sphy->clk))
 		return dev_err_probe(dev, PTR_ERR(sphy->clk), "Failed to get clock\n");
@@ -185,7 +208,7 @@ static int spacemit_usb2phy_probe(struct platform_device *pdev)
 	if (IS_ERR(sphy->regmap_base))
 		return dev_err_probe(dev, PTR_ERR(sphy->regmap_base), "Failed to init regmap\n");
 
-	sphy->phy = devm_phy_create(dev, NULL, &spacemit_usb2phy_ops);
+	sphy->phy = devm_phy_create(dev, NULL, ops);
 	if (IS_ERR(sphy->phy))
 		return dev_err_probe(dev, PTR_ERR(sphy->phy), "Failed to create phy\n");
 
@@ -196,7 +219,8 @@ static int spacemit_usb2phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id spacemit_usb2phy_dt_match[] = {
-	{ .compatible = "spacemit,k1-usb2-phy", },
+	{ .compatible = "spacemit,k1-usb2-phy", .data = &spacemit_k1_usb2phy_ops },
+	{ .compatible = "spacemit,k3-usb2-phy", .data = &spacemit_k3_usb2phy_ops },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spacemit_usb2phy_dt_match);

-- 
2.52.0