[PATCH 2/3] phy: k1-usb: add disconnect function support

[Yixun Lan]

A disconnect status BIT of USB2 PHY need to be cleared, otherwise
it will fail to work properly during next connection when devices
connect to roothub directly.

Signed-off-by: Yixun Lan <dlan at kernel.org>
---
 drivers/phy/spacemit/phy-k1-usb2.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 342061380012..959bf79c7a72 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -48,6 +48,9 @@
 #define  PHY_CLK_HSTXP_EN		BIT(3)		/* clock hstxp enable */
 #define  PHY_HSTXP_MODE			BIT(4)		/* 0: force en_txp to be 1; 1: no force */
 
+#define PHY_K1_HS_HOST_DISC		0x40
+#define  PHY_K1_HS_HOST_DISC_CLR		BIT(0)
+
 #define PHY_PLL_DIV_CFG			0x98
 #define  PHY_FDIV_FRACT_8_15		GENMASK(7, 0)
 #define  PHY_FDIV_FRACT_16_19		GENMASK(11, 8)
@@ -142,9 +145,20 @@ static int spacemit_usb2phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
+{
+	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
+
+	regmap_update_bits(sphy->regmap_base, PHY_K1_HS_HOST_DISC,
+					   PHY_K1_HS_HOST_DISC_CLR, PHY_K1_HS_HOST_DISC_CLR);
+
+	return 0;
+}
+
 static const struct phy_ops spacemit_usb2phy_ops = {
 	.init = spacemit_usb2phy_init,
 	.exit = spacemit_usb2phy_exit,
+	.disconnect = spacemit_usb2phy_disconnect,
 	.owner = THIS_MODULE,
 };
 

-- 
2.52.0