[PATCH] riscv: smp: Align secondary_start_sbi to 4 bytes

[cp0613 at linux.alibaba.com]

From: Chen Pei <cp0613 at linux.alibaba.com>

During SMP boot, the secondary_start_sbi address is passed to the
slave core via sbi_hsm_hart_start. In OpenSBI, this address is
written to STVEC in sbi_hart_switch_mode.

According to the privileged specification, the BASE field of STVEC
must always be aligned on a 4-byte boundary. However, System.map
reveals that secondary_start_sbi is not a 4-byte aligned address.

For example, the address of secondary_start_sbi is
0xffffffff80001066, and the disassembly is as follows:

Dump of assembler code from 0xffffffff80001052 to 0xffffffff8000107a:
   0xffffffff80001052 <_start+4178>:    c.nop   -11
   0xffffffff80001054 <_start+4180>:    auipc   gp,0x1a1f
   0xffffffff80001058 <_start+4184>:    addi    gp,gp,84
   0xffffffff8000105c <_start+4188>:    csrw    satp,a2
   0xffffffff80001060 <_start+4192>:    sfence.vma
   0xffffffff80001064 <_start+4196>:    ret
   0xffffffff80001066 <_start+4198>:    csrw    sie,zero
   0xffffffff8000106a <_start+4202>:    csrw    sip,zero
   0xffffffff8000106e <_start+4206>:    li      t0,2
   0xffffffff80001070 <_start+4208>:    csrw    scounteren,t0
   0xffffffff80001074 <_start+4212>:    auipc   gp,0x1a1f
   0xffffffff80001078 <_start+4216>:    addi    gp,gp,52

When writing to STVEC at address 0xffffffff80001066, the actual
write address is 0xffffffff80001064, corresponding to the address
of the previous ret instruction. This is unexpected, and if an
interrupt occurs at this point, it will cause unpredictable results.

However, secondary_start_sbi immediately masks all interrupts and
updates STVEC, so no problems occurred.

In summary, it is more reasonable to make secondary_start_sbi
satisfy 4-byte alignment.

Signed-off-by: Chen Pei <cp0613 at linux.alibaba.com>
---
 arch/riscv/kernel/head.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index bdf3352acf4c..f35dbfa79505 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -124,6 +124,7 @@ relocate_enable_mmu:
 
 	ret
 #endif /* CONFIG_MMU */
+.align 2
 #ifdef CONFIG_SMP
 	.global secondary_start_sbi
 secondary_start_sbi:
-- 
2.50.1