[PATCH v8 0/5] Add support for NetCube Systems Nagami SoM and its carrier boards

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

On Sun, 31 Aug 2025 18:25:29 +0200, Lukas Schmid wrote:
> This series adds support for the NetCube Systems Nagami SoM and its
> associated carrier boards, the Nagami Basic Carrier and the Nagami Keypad
> Carrier.
> 
> Changes in v8:
>   - Use a gpio-mux instead of the gpio-hog for the USB0_SEC_EN signal
>   - Fix the dt-schema issues
> 
> [...]

Applied to sunxi/dt-for-6.18 in local tree, thanks!

[1/5] dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
      commit: db5796c5c5c6db72339e818b54e6a2e043f7032c
[2/5] riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
      commit: cbce6d5326b116f55dc29f7fc0a7d56a9a03d9e5
[3/5] ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
      commit: cba2febbd6465aabdff157fb95b1c07d090af1f0
[4/5] ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
      commit: e36d4d54eefb60144666b27754007e1c0dd0a581
[5/5] ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
      commit: caffed0800ef4dd29cc29ee17a89d015e867e03a

Note that there were some cases in the device tree files where lines were
indented more than necessary, like for gpio-line-names and the board level
fallback compatible string. Wrapped lines for lists of items should align
with the first item on the first line.


Best regards,
-- 
Chen-Yu Tsai <wens at csie.org>