[PATCH v4 5/7] PCI: spacemit: introduce SpacemiT PCIe host driver

[Bjorn Helgaas]

In subject, capitalize "introduce" to match history.  Or you could
just use "Add ...", which has the advantage of being shorter.

On Thu, Oct 30, 2025 at 05:02:56PM -0500, Alex Elder wrote:
> Introduce a driver for the PCIe host controller found in the SpacemiT
> K1 SoC.  The hardware is derived from the Synopsys DesignWare PCIe IP.
> The driver supports three PCIe ports that operate at PCIe gen2 transfer
> rates (5 GT/sec).  The first port uses a combo PHY, which may be
> configured for use for USB 3 instead.
> ...

I guess this doesn't support INTx interrupts at all?

> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -509,6 +509,17 @@ config PCI_KEYSTONE_EP
>  	  on DesignWare hardware and therefore the driver re-uses the
>  	  DesignWare core functions to implement the driver.
>  
> +config PCIE_SPACEMIT_K1
> +	tristate "SpacemiT K1 PCIe controller (host mode)"

Move this to keep the menu items alphabetized by vendor.

> +	depends on ARCH_SPACEMIT || COMPILE_TEST
> +	depends on PCI && OF && HAS_IOMEM

I don't think you need PCI or OF.

> +	select PCIE_DW_HOST
> +	select PCI_PWRCTRL_SLOT
> +	default ARCH_SPACEMIT
> +	help
> +	  Enables support for the PCIe controller in the K1 SoC operating
> +	  in host mode.

Most help text includes both the vendor and the product line names.