[PATCH v3 1/1] RISC-V: Add common csr_read_num() and csr_write_num() functions

[Paul Walmsley]

Hi Anup,

On Tue, 14 Oct 2025, Anup Patel wrote:

> In RISC-V, there is no CSR read/write instruction which takes CSR
> number via register so add common csr_read_num() and csr_write_num()
> functions which allow accessing certain CSRs by passing CSR number
> as parameter. These common functions will be first used by the
> ACPI CPPC driver and RISC-V PMU driver.
> 
> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> Reviewed-by: Sunil V L <sunilvl at ventanamicro.com>
> Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
> Reviewed-by: Atish Patra <atishp at rivosinc.com>
> Reviewed-by: Nutty Liu <nutty.liu at hotmail.com>

This patch also (silently) removes the CSR number filtering, e.g.

> diff --git a/drivers/acpi/riscv/cppc.c b/drivers/acpi/riscv/cppc.c
> index 42c1a9052470..fe491937ed25 100644
> --- a/drivers/acpi/riscv/cppc.c
> +++ b/drivers/acpi/riscv/cppc.c
> @@ -65,24 +65,19 @@ static void sbi_cppc_write(void *write_data)
>  static void cppc_ffh_csr_read(void *read_data)
>  {
>  	struct sbi_cppc_data *data = (struct sbi_cppc_data *)read_data;
> +	int err;
>  
> -	switch (data->reg) {
> -	/* Support only TIME CSR for now */
> -	case CSR_TIME:
> -		data->ret.value = csr_read(CSR_TIME);
> -		data->ret.error = 0;
> -		break;
> -	default:
> -		data->ret.error = -EINVAL;
> -		break;
> -	}

... the above code, and:

>  /*
>   * Read the CSR of a corresponding counter.
>   */
>  unsigned long riscv_pmu_ctr_read_csr(unsigned long csr)
>  {
> -	if (csr < CSR_CYCLE || csr > CSR_HPMCOUNTER31H ||
> -	   (csr > CSR_HPMCOUNTER31 && csr < CSR_CYCLEH)) {
> -		pr_err("Invalid performance counter csr %lx\n", csr);
> -		return -EINVAL;

... the above code.

I'm thinking that we probably want to keep the CSR number filtering code 
in; at least, I can't think of a good reason to remove it.  Care to add it 
back in?


- Paul