[PATCH v4 1/2] driver: reset: spacemit-p1: add driver for poweroff/reboot

[Troy Mitchell]

On Mon, Oct 27, 2025 at 07:01:13AM +0100, Aurelien Jarno wrote:
> On 2025-10-27 11:20, Troy Mitchell wrote:
> > On Sun, Oct 26, 2025 at 11:41:14PM +0100, Aurelien Jarno wrote:
> > > This driver implements poweroff/reboot support for the SpacemiT P1 PMIC
> > > chip, which is commonly paired with the SpacemiT K1 SoC.
> > > 
> > > The SpacemiT P1 support is implemented as a MFD driver, so the access is
> > > done directly through the regmap interface. Reboot or poweroff is
> > > triggered by setting a specific bit in a control register, which is
> > > automatically cleared by the hardware afterwards.
> > > 
> > > Signed-off-by: Aurelien Jarno <aurelien at aurel32.net>
> > > ---
> > > v2:
> > >  - Replace the "select" by a "depends on"
> > >  - Remove outdated Reviewed-by
> > > 
> > >  drivers/power/reset/Kconfig              |  9 +++
> > >  drivers/power/reset/Makefile             |  1 +
> > >  drivers/power/reset/spacemit-p1-reboot.c | 88 ++++++++++++++++++++++++
> > >  3 files changed, 98 insertions(+)
> > >  create mode 100644 drivers/power/reset/spacemit-p1-reboot.c
> > > 
> > > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> > > index 8248895ca9038..61c16f3d5abc7 100644
> > > --- a/drivers/power/reset/Kconfig
> > > +++ b/drivers/power/reset/Kconfig
> > > @@ -283,6 +283,15 @@ config POWER_RESET_KEYSTONE
> > >  	help
> > >  	  Reboot support for the KEYSTONE SoCs.
> > >  
> > > +config POWER_RESET_SPACEMIT_P1
> > > +	tristate "SpacemiT P1 poweroff and reset driver"
> > > +	depends on ARCH_SPACEMIT || COMPILE_TEST
> > > +	depends on MFD_SPACEMIT_P1
> > > +	default m
> > default m if ARCH_SPACEMIT?
> 
> As explained here, this is equivalent:
> https://lore.kernel.org/spacemit/CAJM55Z_BzfRo5aKf2VrneTymSizwDQq6OfMK_LNgyoGjp43K8Q@mail.gmail.com/
> 
> But I can make a v5 to change that, if it's the preferred form on the 
> SpacemiT side.
I missed that conversation. Just keep it!
> 
> > Or default ARCH_SPACEMIT?
> > I believe that reboot and shutdown are actually essential functionalities,
> > so it might make more sense: default ARCH_SPACEMIT?
> 
> That was already changed in v3, following a request on v2:
> https://lore.kernel.org/spacemit/CANBLGczi3GeaC4aWECV8NS-zqSHgRa-5onynz9fGsZeN8qgysg@mail.gmail.com/
Thanks for your link.

                        - Troy
> 
> Regards
> Aurelien
> 
> -- 
> Aurelien Jarno                          GPG: 4096R/1DDD8C9B
> aurelien at aurel32.net                     http://aurel32.net
>