[PATCH v2 0/1] Add Ethernet and PDMA support to OrangePi RV2 board

[Yixun Lan]

On Wed, 22 Oct 2025 20:18:30 +0000, michael.opdenacker at rootcommit.com wrote:
> From: Michael Opdenacker <michael.opdenacker at rootcommit.com>
> 
> Reusing DTS code from the BananaPi F3 board.
> 
> iperf3 tcp performance results:
> 
> Eth1 client test (iperf3 -c <server-ip>)
> [  5] local 172.24.0.2 port 41914 connected to 172.24.0.1 port 5201
> [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
> [  5]   0.00-1.00   sec   113 MBytes   946 Mbits/sec    0    378 KBytes
> [  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec    0    424 KBytes
> [  5]   2.00-3.00   sec   113 MBytes   947 Mbits/sec    0    424 KBytes
> [  5]   3.00-4.00   sec   112 MBytes   939 Mbits/sec    0    445 KBytes
> [  5]   4.00-5.00   sec   112 MBytes   944 Mbits/sec    0    445 KBytes
> [  5]   5.00-6.00   sec   112 MBytes   937 Mbits/sec    0    445 KBytes
> [  5]   6.00-7.00   sec   113 MBytes   944 Mbits/sec    1    445 KBytes
> [  5]   7.00-8.00   sec   112 MBytes   936 Mbits/sec    0    445 KBytes
> [  5]   8.00-9.00   sec   112 MBytes   943 Mbits/sec    0    445 KBytes
> [  5]   9.00-10.01  sec   114 MBytes   944 Mbits/sec    0    445 KBytes
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-10.01  sec  1.10 GBytes   942 Mbits/sec    1            sender
> [  5]   0.00-10.02  sec  1.10 GBytes   940 Mbits/sec                  receiver
> 
> [...]

Applied, thanks!

[1/1] riscv: dts: spacemit: add Ethernet and PDMA to OrangePi RV2
      https://github.com/spacemit-com/linux/commit/9813395078352fed03c88742bd39b9c4a0e40c15

Best regards,
-- 
Yixun Lan