[PATCH v2 5/5] riscv: dts: spacemit: add Ethernet support for MusePi Pro

[Vivian Wang]

On 10/10/25 14:13, Vivian Wang wrote:
> On 10/10/25 09:56, Troy Mitchell wrote:
>> MusePi Pro features a single RGMII Ethernet port with
>> PHY reset controlled by GPIO.
>>
>> Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
>> ---
>>  arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts | 23 +++++++++++++++++++++++
>>  1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
>> index 89a35914710bfd15c6ad27cd8d0de7ccf62e2309..e9a53dc7a417117c82f3e467677290bdaeffc845 100644
>> --- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
>> +++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
>> @@ -47,6 +47,29 @@ &pdma {
>>  	status = "okay";
>>  };
>>  
>> +&eth0 {
> For node orders in board DTS for SpacemiT devices, usually we follow
> node name order because there's no unit address to go off of here, so
> for what we have here it should be emmc, eth0, pdma, uart.
>
> See e.g. arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts and previous
> discussion [1].
>
> Also, personally I think it would be fine to just add the whole
> k1-musepi-pro.dts in the same patch instead of splitting it up like
> this. I feel it would be easier to manage this way. For previous devices
> these nodes have been added piecemeal mostly because the drivers were
> being developed in parallel, but if you're going to base this on
> v6.18-rc1 there shouldn't be dependency problems.
... and also almost missed: this should have an ethernet0 alias. In the
most common boot flow it's read by U-Boot to set mac-address so that
both U-Boot and Linux use the same MAC address. This allows U-Boot to a
persistent MAC address rather than having to use a random one.  
> Maybe Yixun can chime in about this as well.
>
> Thanks,
> Vivian "dramforever" Wang
>
> [1]: https://lore.kernel.org/linux-riscv/CAH1PCMa35n4dnJ94-EHGrJyU3kztQYO8_v2CkD=rid466zv3+A@mail.gmail.com
>