[PATCH v3 6/8] riscv: dts: spacemit: Add PDMA0 node for K1 SoC

Yixun Lan dlan at gentoo.org
Thu Jul 24 05:19:16 PDT 2025


Hi Guodong,

On 17:39 Mon 14 Jul     , Guodong Xu wrote:
> Add PDMA0 dma-controller node under dma_bus for SpacemiT K1 SoC.
> 
> The PDMA0 node is marked as disabled by default, allowing board-specific
> device trees to enable it as needed.
> 
> Signed-off-by: Guodong Xu <guodong at riscstar.com>
> ---
> v3:
> - adjust pdma0 position, ordering by device address
> - update properties according to the newly created schema binding
> v2:
> - Updated the compatible string.
> - Rebased. Part of the changes in v1 is now in this patchset:
>    - "riscv: dts: spacemit: Add DMA translation buses for K1"
>    - Link: https://lore.kernel.org/all/20250623-k1-dma-buses-rfc-wip-v1-0-c0144082061f@iscas.ac.cn/
> ---
>  arch/riscv/boot/dts/spacemit/k1.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index abde8bb07c95c5a745736a2dd6f0c0e0d7c696e4..46dc002af947893cc2c234ee61e63c371cd966ca 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -660,6 +660,17 @@ dma-bus {
>  			dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
>  				     <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
>  
> +			pdma0: dma-controller at d4000000 {
does K1 has more than one pdma controller? No? as I checked..
so, I'd suggest simply naming it as 'pdma' - which clear the confusion
that there will be more than one pdma nodes..

> +				compatible = "spacemit,k1-pdma";
> +				reg = <0x0 0xd4000000 0x0 0x4000>;
..
> +				interrupts = <72>;
for consistency in this dtsi file, I'd suggest moving "interrupts" after "clocks",
or even after "resets"? leave "clocks & resets" together..

> +				clocks = <&syscon_apmu CLK_DMA>;
> +				resets = <&syscon_apmu RESET_DMA>;
> +				dma-channels = <16>;
> +				#dma-cells= <1>;
> +				status = "disabled";
> +			};
> +
>  			uart0: serial at d4017000 {
>  				compatible = "spacemit,k1-uart",
>  					     "intel,xscale-uart";
> 
> -- 
> 2.43.0
> 

-- 
Yixun Lan (dlan)



More information about the linux-riscv mailing list