[PATCH] riscv: dts: spacemit: uart: set dummy clock to silent dt warning

[Yixun Lan]

sec_uart1 is reserved in DT, and no clock is implemented in the CCF
framework, thus 'make dtbs_check' will eject this warning message:
  serial at f0612000: 'clock-names' is a required property

So, adding a dummy clock to the device tree to fulfill the clock
requirement, then silent this dt check warning.

Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index c0f8c5fca975d73b6ea6886da13fcf55289cb16c..e9b98f2a3b1cc38f569d7de336630df846cbfbe7 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -309,6 +309,13 @@ cluster1_l2_cache: l2-cache1 {
 	};
 
 	clocks {
+		clk_dummy: clock-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "clk_dummy";
+		};
+
 		vctcxo_1m: clock-1m {
 			compatible = "fixed-clock";
 			clock-frequency = <1000000>;
@@ -556,8 +563,9 @@ clint: timer at e4000000 {
 		sec_uart1: serial at f0612000 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xf0612000 0x0 0x100>;
+			clocks = <&clk_dummy>, <&clk_dummy>;
+			clock-names = "core", "bus";
 			interrupts = <43>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "reserved"; /* for TEE usage */

---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250718-02-k1-uart-clock-0beb9ef10fe0

Best regards,
-- 
Yixun Lan