[PATCH 2/2] riscv: dts: spacemit: Add OrangePi RV2 board device tree

[Yixun Lan]

On 20:32 Fri 11 Jul     , Hendrik Hamerlinck wrote:
> Add initial device tree support for the OrangePi RV2 board [1], which is
> marketed as using the Ky X1 SoC but has been confirmed to be 
> identical to the SpacemiT K1 [2].
> 
> The device tree is adapted from the OrangePi vendor tree [3], and similar
> integration can be found in the Banana Pi kernel tree [4], confirming SoC
> compatibility.
> 
> This minimal device tree enables booting into a serial console with UART
> output and a blinking LED.
> 
> Link: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-RV2.html [1]
> Link: https://www.spacemit.com/en/key-stone-k1 [2]
> Link: https://github.com/BPI-SINOVOIP/pi-linux/blob/linux-6.6.63-k1/arch/riscv/boot/dts/spacemit/k1-x_orangepi-rv2.dts [3]
> Link: https://github.com/orangepi-xunlong/linux-orangepi/tree/orange-pi-6.6-ky [4]
> Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck at hammernet.be>
> ---
>  arch/riscv/boot/dts/spacemit/Makefile         |  1 +
>  .../boot/dts/spacemit/k1-orangepi-rv2.dts     | 43 +++++++++++++++++++
>  2 files changed, 44 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
> 
> diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
> index 92e13ce1c16d..152832644870 100644
> --- a/arch/riscv/boot/dts/spacemit/Makefile
> +++ b/arch/riscv/boot/dts/spacemit/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
>  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
> +dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
> diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
> new file mode 100644
> index 000000000000..8313f9589cd2
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
..
> +/* Copyright (c) 2023 Ky, Inc */
Copyright should cover current year, which is 2025..
what's "Ky" stand for? Can you give a full description here

> +
> +/dts-v1/;
> +
> +#include "k1.dtsi"
> +#include "k1-pinctrl.dtsi"
> +
> +/ {
> +	model = "OrangePi RV2";
> +	compatible = "xunlong,orangepi-rv2", "spacemit,k1";
> +
..
> +	memory at 0 {
> +		device_type = "memory";
> +		reg = <0x0 0x00000000 0x0 0x80000000>;
> +	};
> +
> +	memory at 100000000 {
> +		device_type = "memory";
> +		reg = <0x1 0x00000000 0x0 0x80000000>;
> +	};
> +
for the memory nodes, there are 2/4/8GB variants from the Link [1], and
you couldn't cover all of them in one dt

besides, I thought bootloader (u-boot) will populate these info, right?
so the above nodes isn't really necessary

> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led1 {
> +			label = "sys-led";
> +			gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +			default-state = "on";
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_2_cfg>;
> +	status = "okay";
> +};
> -- 
> 2.43.0
> 

-- 
Yixun Lan (dlan)