[PATCH v3 2/5] riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM

[Lukas Schmid]

On Dienstag, 8. Juli 2025 18:36:03 CEST Chen-Yu Tsai wrote:
> On Tue, Jul 8, 2025 at 8:35 AM Lukas Schmid <lukas.schmid at netcube.li> wrote:
> > Added the following pinctrl's used by the NetCube Systems Nagami SoM
> > 
> >   * i2c2_pins
> >   * i2c3_pins
> >   * i2s1_pins, i2s1_din_pins, i2s1_dout_pins
> >   * spi1_pins
> > 
> > Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> > ---
> > 
> >  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 36 +++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> > 
> > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index
> > e4175adb0..8dc3deccb 100644
> > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > @@ -78,6 +78,36 @@ dsi_4lane_pins: dsi-4lane-pins {
> > 
> >                                 function = "dsi";
> >                         
> >                         };
> > 
> > +                       /omit-if-no-ref/
> > +                       i2c2_pins: i2c2-pins {
> > +                               pins = "PD20", "PD21";
> > +                               function = "i2c2";
> > +                       };
> > +
> > +                       /omit-if-no-ref/
> > +                       i2c3_pins: i2c3-pins {
> > +                               pins = "PG10", "PG11";
> > +                               function = "i2c3";
> > +                       };
> > +
> > +                       /omit-if-no-ref/
> > +                       i2s1_pins: i2s1-pins {
> > +                               pins = "PG12", "PG13";
> > +                               function = "i2s1";
> > +                       };
> > +
> > +                       /omit-if-no-ref/
> > +                       i2s1_din_pins: i2s1-din-pins {
> > +                               pins = "PG14";
> > +                               function = "i2s1_din";
> > +                       };
> > +
> > +                       /omit-if-no-ref/
> > +                       i2s1_dout_pins: i2s1-dout-pins {
> > +                               pins = "PG15";
> > +                               function = "i2s1_dout";
> > +                       };
> > +
> > 
> >                         /omit-if-no-ref/
> >                         lcd_rgb666_pins: lcd-rgb666-pins {
> >                         
> >                                 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
> >                                 "PD5",
> > 
> > @@ -126,6 +156,12 @@ spi0_pins: spi0-pins {
> > 
> >                                 function = "spi0";
> >                         
> >                         };
> > 
> > +                       /omit-if-no-ref/
> > +                       spi1_pins: spi1-pins {
> > +                               pins = "PD10", "PD11", "PD12", "PD13",
> > "PD14", "PD15";
> Could you split out the WP and HOLD pins as separate nodes. They aren't
> strictly needed for SPI, and folks might have designs that use the two
> pins for other purposes.
> 
Sure. Do you want them as seperate ones, or is "spi1_hold_wp_pins" fine?
> 
> Thanks
> ChenYu
> 
> > +                               function = "spi1";
> > +                       };
> > +
> > 
> >                         /omit-if-no-ref/
> >                         uart1_pg6_pins: uart1-pg6-pins {
> >                         
> >                                 pins = "PG6", "PG7";
> > 
> > --
> > 2.39.5

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20250708/ccde919c/attachment.sig>