[PATCH v2 2/5] riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM

[Andre Przywara]

On Sun,  6 Jul 2025 20:35:55 +0200
Lukas Schmid <lukas.schmid at netcube.li> wrote:

Hi,

> Added the following pinctrl's used by the NetCube Systems Nagami SoM
>   * i2c2_pins
>   * i2c3_pins
>   * i2s1_pins, i2s1_din_pins, i2s1_dout_pins
>   * spi1_pins
> 
> Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> ---
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 36 +++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index e4175adb0..8dc3deccb 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -78,6 +78,36 @@ dsi_4lane_pins: dsi-4lane-pins {
>  				function = "dsi";
>  			};
>  
> +			/omit-if-no-ref/
> +			i2c2_pins: i2c2-pins {
> +				pins = "PD20", "PD21";
> +				function = "i2c2";
> +			};
> +
> +			/omit-if-no-ref/
> +			i2c3_pins: i2c3-pins {
> +				pins = "PG10", "PG11";
> +				function = "i2c3";
> +			};
> +
> +			/omit-if-no-ref/
> +			i2s1_pins: i2s1-pins {
> +				pins = "PG12", "PG13";
> +				function = "i2s1";
> +			};
> +
> +			/omit-if-no-ref/
> +			i2s1_din_pins: i2s1-din-pins {
> +				pins = "PG14";
> +				function = "i2s1_din";
> +			};
> +
> +			/omit-if-no-ref/
> +			i2s1_dout_pins: i2s1-dout-pins {
> +				pins = "PG15";
> +				function = "i2s1_dout";
> +			};
> +
>  			/omit-if-no-ref/
>  			lcd_rgb666_pins: lcd-rgb666-pins {
>  				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
> @@ -126,6 +156,12 @@ spi0_pins: spi0-pins {
>  				function = "spi0";
>  			};
>  
> +			/omit-if-no-ref/
> +			spi1_pins: spi1-pins {
> +				pins = "PD10", "PD11", "PD12", "PD13", "PD14", "PD15";

Can you please split this up, to have the MISO/MOSI/CLK signals under a
separate label, so that basic users can reuse this group?
CS should be a separate group, and I guess HOLD and WP can be in
another.

The rest looks alright, compared against the manual.

Cheers,
Andre

> +				function = "spi1";
> +			};
> +
>  			/omit-if-no-ref/
>  			uart1_pg6_pins: uart1-pg6-pins {
>  				pins = "PG6", "PG7";