[PATCH v2 0/5] Add support for NetCube Systems Nagami SoM and its carrier boards
Rob Herring (Arm)
robh at kernel.org
Mon Jul 7 10:55:27 PDT 2025
On Sun, 06 Jul 2025 20:35:53 +0200, Lukas Schmid wrote:
> This series adds support for the NetCube Systems Nagami SoM and its
> associated carrier boards, the Nagami Basic Carrier and the Nagami Keypad
> Carrier.
>
> Changes in v2:
> - Squash the binding patches into one patch
> - Fix formatting of the phy node in the SoM dtsi
> - Add description on where the phy is located in the SoM dtsi
> - Fix the phy address in the SoM dtsi
> - Move the carrier bindings into the same description as enums
>
> Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> ---
> Lukas Schmid (5):
> dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier
> board bindings
> riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube
> Systems Nagami SoM
> ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
> ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
> ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
>
> .../devicetree/bindings/arm/sunxi.yaml | 17 ++
> arch/arm/boot/dts/allwinner/Makefile | 3 +
> ...n8i-t113s-netcube-nagami-basic-carrier.dts | 63 +++++
> ...8i-t113s-netcube-nagami-keypad-carrier.dts | 165 +++++++++++++
> .../allwinner/sun8i-t113s-netcube-nagami.dtsi | 227 ++++++++++++++++++
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 36 +++
> 6 files changed, 511 insertions(+)
> create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
> create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
> create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
>
> --
> 2.39.5
>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250704 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/allwinner/' for 20250706183601.157523-1-lukas.schmid at netcube.li:
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dtb: dcxo-clk (fixed-clock): 'clock-frequency' is a required property
from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dtb: gpio at 20 (microchip,mcp23008): Unevaluated properties are not allowed ('interrupt-names' was unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/microchip,mcp23s08.yaml#
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dtb: usb at 4100000 (allwinner,sun20i-d1-musb): dr_mode:0: 'device' is not one of ['host', 'otg', 'peripheral']
from schema $id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml#
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dtb: status-led (leds-group-multicolor): $nodename:0: 'status-led' does not match '^multi-led(@[0-9a-f])?$'
from schema $id: http://devicetree.org/schemas/leds/leds-group-multicolor.yaml#
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dtb: status-led (leds-group-multicolor): Unevaluated properties are not allowed ('color', 'function' were unexpected)
from schema $id: http://devicetree.org/schemas/leds/leds-group-multicolor.yaml#
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dtb: dcxo-clk (fixed-clock): 'clock-frequency' is a required property
from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
More information about the linux-riscv
mailing list