[PATCH v1 5/7] ARM: dts: sunxi: add support for NetCube Systems Nagami SoM

[Andrew Lunn]

On Sun, Jul 06, 2025 at 11:06:34AM +0200, Lukas Schmid wrote:
> On Sonntag, 6. Juli 2025 09:38:00 CEST Andrew Lunn wrote:
> > > +&mdio {
> > > +	lan8720a: ethernet-phy at 1 {
> > > +			compatible = "ethernet-phy-ieee802.3-c22";
> > > +			reg = <1>;
> > > +	};
> > > +};
> > 
> > Just for clarification: The PHY is on the SOM? I've seen systems where
> > the PHY is on the SOM, and the magnetics and RJ45 on the carrier
> > board. I've also seen systems where the PHY, magnetics and RJ45 are on
> > the carrier.
> 
> Yes that' the case here. The PHY is located on the SoM and the MDI signals
> before any magnetics are on the SoM's Card-Edge. The magnetics are required
> on the Carrier board (e.g. a MagJack or dedicated Transformer)

O.K. great. If you need to respin, please extend either the commit
message including this, or add a comment in the .dtsi file for the
SOM.

	Andrew