[PATCH v1 3/7] dt-bindings: arm: sunxi: Add NetCube Systems Nagami Keypad Carrier Board

[Lukas Schmid]

On Sonntag, 6. Juli 2025 11:58:16 CEST Lukas Schmid wrote:
> On Sonntag, 6. Juli 2025 11:46:46 CEST Krzysztof Kozlowski wrote:
> > On 06/07/2025 11:41, Lukas Schmid wrote:
> > > On Sonntag, 6. Juli 2025 11:36:34 CEST Krzysztof Kozlowski wrote:
> > >> On 06/07/2025 11:07, Lukas Schmid wrote:
> > >>> On Sonntag, 6. Juli 2025 09:49:58 CEST Krzysztof Kozlowski wrote:
> > >>>> On 05/07/2025 23:38, Lukas Schmid wrote:
> > >>>>> The NetCube Systems Nagami Keypad Carrier is a custom board intended
> > >>>>> to
> > >>>>> fit a standard Ritto Intercom enclosure and provides a Keypad,
> > >>>>> NFC-Reader
> > >>>>> and Status-LED all controllable over Ethernet with PoE support.
> > >>>>> 
> > >>>>> Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> > >>>>> ---
> > >>>>> 
> > >>>>>  Documentation/devicetree/bindings/arm/sunxi.yaml | 6 ++++++
> > >>>>>  1 file changed, 6 insertions(+)
> > >>>>> 
> > >>>>> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml
> > >>>>> b/Documentation/devicetree/bindings/arm/sunxi.yaml index
> > >>>>> 7919b5bf5..a2f16d064 100644
> > >>>>> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> > >>>>> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> > >>>>> 
> > >>>>> @@ -610,6 +610,12 @@ properties:
> > >>>>>            - const: netcube,nagami
> > >>>>>            - const: allwinner,sun8i-t113s
> > >>>>> 
> > >>>>> +      - description: NetCube Systems Nagami Keypad Carrier Board
> > >>>>> +        items:
> > >>>>> +          - const: netcube,nagami-keypad-carrier
> > >>>> 
> > >>>> That's just enum with previous entry. Don't make it over-complicated.
> > >>>> 
> > >>>> Best regards,
> > >>>> Krzysztof
> > >>> 
> > >>> Just making sure here. The actual bindings are fine, but I should
> > >>> merge
> > >>> them into one patch, correct?
> > >> 
> > >> No, you got two comments what should be changed in the binding.
> > >> 
> > >> Best regards,
> > >> Krzysztof
> > > 
> > > So if I understand correctly you want me to remove the
> > > "allwinner,sun8i-t113s" from the carrier boards and keep it for the SoM?
> > 
> > No, I spoke nothing about that compatible. My comment is EXACTLY under
> > the line being incorrect. That entry should have been made enum with
> > previous board compatible. Look at other vendors, because this file
> > repeats that pattern for some reason, eh...
> > 
> > Best regards,
> > Krzysztof
> 
> Ah sorry. I think i understand now. You want the carrier boards in a single
> entry with the different compatibles as the enum like:
> 
>       - description: NetCube Systems Nagami SoM
>         items:
>           - const: netcube,nagami
>           - const: allwinner,sun8i-t113s
> 
>       - description: NetCube Systems Nagami SoM based boards
>         items:
>           - enum:
>               - netcube,nagami-basic-carrier
>               - netcube,nagami-keypad-carrier
>           - const: netcube,nagami
>           - const: allwinner,sun8i-t113s
> 
> Best regards,
> Lukas

Oh, I will then drop the SoM's entry as well since the SoM is already defined 
in the carrier boards then. So only

      - description: NetCube Systems Nagami SoM based boards
        items:
          - enum:
              - netcube,nagami-basic-carrier
              - netcube,nagami-keypad-carrier
          - const: netcube,nagami
          - const: allwinner,sun8i-t113s

correct?

Sorry for the back-and-forth, and thanks for your patience.

Best regards,
Lukas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20250706/6b469c57/attachment.sig>