[PATCH net-next v4 1/2] dt-bindings: net: Add support for SpacemiT K1

[Vivian Wang]

On 7/3/25 18:49, Rob Herring (Arm) wrote:
> On Thu, 03 Jul 2025 17:42:02 +0800, Vivian Wang wrote:
>> The Ethernet MACs on SpacemiT K1 appears to be a custom design. SpacemiT
>> refers to them as "EMAC", so let's just call them "spacemit,k1-emac".
>>
>> Signed-off-by: Vivian Wang <wangruikang at iscas.ac.cn>
>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>> ---
>>   .../devicetree/bindings/net/spacemit,k1-emac.yaml  | 81 ++++++++++++++++++++++
>>   1 file changed, 81 insertions(+)
>>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/net/spacemit,k1-emac.example.dts:36.36-37 syntax error
> FATAL ERROR: Unable to parse input tree

My bad. The example still depends on the reset bindings for the constant 
RESET_EMAC0. I just tried with reset v12 [1] and that fixes it.

[1]: https://lore.kernel.org/spacemit/20250702113709.291748-2-elder@riscstar.com/

Vivian "dramforever" Wang

> make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/net/spacemit,k1-emac.example.dtb] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1519: dt_binding_check] Error 2
> make: *** [Makefile:248: __sub-make] Error 2
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250703-net-k1-emac-v4-1-686d09c4cfa8@iscas.ac.cn
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.