[PATCH net-next v2 09/18] net: macb: sort #includes

[Sean Anderson]

On 6/27/25 05:08, Théo Lebrun wrote:
> Sort #include preprocessor directives.
> 
> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
> Signed-off-by: Théo Lebrun <theo.lebrun at bootlin.com>
> ---
>  drivers/net/ethernet/cadence/macb_main.c | 36 ++++++++++++++++----------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index be667cb5acce85a9d11aaea1f5081a3380b60ef2..a6633e076644089c796453f856a766299bae2ec6 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -6,36 +6,36 @@
>   */
>  
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -#include <linux/clk.h>
> +#include <linux/circ_buf.h>
>  #include <linux/clk-provider.h>
> +#include <linux/clk.h>
>  #include <linux/crc32.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/etherdevice.h>
> +#include <linux/firmware/xlnx-zynqmp.h>
> +#include <linux/inetdevice.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/ip.h>
> +#include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/moduleparam.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/circ_buf.h>
> -#include <linux/slab.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -#include <linux/interrupt.h>
>  #include <linux/netdevice.h>
> -#include <linux/etherdevice.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/platform_device.h>
> -#include <linux/phylink.h>
>  #include <linux/of.h>
>  #include <linux/of_mdio.h>
>  #include <linux/of_net.h>
> -#include <linux/ip.h>
> -#include <linux/udp.h>
> -#include <linux/tcp.h>
> -#include <linux/iopoll.h>
>  #include <linux/phy/phy.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/ptp_classify.h>
>  #include <linux/reset.h>
> -#include <linux/firmware/xlnx-zynqmp.h>
> -#include <linux/inetdevice.h>
> +#include <linux/slab.h>
> +#include <linux/tcp.h>
> +#include <linux/types.h>
> +#include <linux/udp.h>
>  #include "macb.h"
>  
>  /* This structure is only used for MACB on SiFive FU540 devices */
> 

Reviewed-by: Sean Anderson <sean.anderson at linux.dev>