[PATCH 1/6] i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails

[Troy Mitchell]

spacemit_i2c_wait_bus_idle() only returns 0 on success or a negative
error code on failure.

Since 'ret' can never be positive, the final 'else' branch was
unreachable, and spacemit_i2c_check_bus_release() was never called.

This commit guarantees we attempt to release the bus whenever waiting for
an idle bus fails.

Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
---
 drivers/i2c/busses/i2c-k1.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
index b68a21fff0b56b59fe2032ccb7ca6953423aad32..ee08811f4087c8e709d25dd314854ed643cc5a47 100644
--- a/drivers/i2c/busses/i2c-k1.c
+++ b/drivers/i2c/busses/i2c-k1.c
@@ -476,12 +476,13 @@ static int spacemit_i2c_xfer(struct i2c_adapter *adapt, struct i2c_msg *msgs, in
 	spacemit_i2c_enable(i2c);
 
 	ret = spacemit_i2c_wait_bus_idle(i2c);
-	if (!ret)
+	if (!ret) {
 		ret = spacemit_i2c_xfer_msg(i2c);
-	else if (ret < 0)
-		dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret);
-	else
+		if (ret < 0)
+			dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret);
+	} else {
 		spacemit_i2c_check_bus_release(i2c);
+	}
 
 	spacemit_i2c_disable(i2c);
 

-- 
2.50.1