[PATCH 4/4] riscv: sophgo: dts: sg2044: change msi irq type to IRQ_TYPE_EDGE_RISING

[Chen Wang]

Hi, Inochi,

Please help review and test this with SG2044 board, I only have 
pioneerbox/SG2042 and it's tested and works.

Thanks,

Chen

On 8/25/2025 2:56 PM, Chen Wang wrote:
> From: Chen Wang <unicorn_wang at outlook.com>
>
> The latest MSI driver will read the DTS configuration to set the IRQ type,
> so correct the IRQ type in the DTS to the correct value.
>
> This field in the DTS was not used before.
>
> Signed-off-by: Chen Wang <unicorn_wang at outlook.com>
> ---
>   arch/riscv/boot/dts/sophgo/sg2044.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/sophgo/sg2044.dtsi b/arch/riscv/boot/dts/sophgo/sg2044.dtsi
> index 6ec955744b0c..320c4d1d08e6 100644
> --- a/arch/riscv/boot/dts/sophgo/sg2044.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/sg2044.dtsi
> @@ -214,7 +214,7 @@ msi: msi-controller at 6d50000000 {
>   			reg-names = "clr", "doorbell";
>   			#msi-cells = <0>;
>   			msi-controller;
> -			msi-ranges = <&intc 352 IRQ_TYPE_LEVEL_HIGH 512>;
> +			msi-ranges = <&intc 352 IRQ_TYPE_EDGE_RISING 512>;
>   			status = "disabled";
>   		};
>