[PATCH 1/3] riscv: dts: thead: th1520: add coefficients to the PVT node
Icenowy Zheng
uwu at icenowy.me
Sat Aug 23 07:37:13 PDT 2025
在 2025-08-22星期五的 14:29 -0700,Drew Fustini写道:
> On Sat, Aug 16, 2025 at 05:32:07PM +0800, Icenowy Zheng wrote:
> > The manual of TH1520 contains a set of coefficients a little
> > different
> > to the driver default ones.
> >
> > Add them to the device tree node of PVT.
> >
> > Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> > ---
> > arch/riscv/boot/dts/thead/th1520.dtsi | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi
> > b/arch/riscv/boot/dts/thead/th1520.dtsi
> > index 03f1d73190499..e9c81bdabed8a 100644
> > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > @@ -676,6 +676,10 @@ pvt: pvt at fffff4e000 {
> > reg-names = "common", "ts", "pd", "vm";
> > clocks = <&aonsys_clk>;
> > #thermal-sensor-cells = <1>;
> > + moortec,ts-coeff-g = <42740>;
> > + moortec,ts-coeff-h = <220500>;
> > + moortec,ts-coeff-j = <(-160)>;
> > + moortec,ts-coeff-cal5 = <4094>;
> > };
> >
> > gpio at fffff52000 {
> > --
> > 2.50.1
> >
>
> I think moortec,ts-coeff-XXX will need to be rounded to nearest
> multiple
> of 100 as dtbs_check warns that:
>
> pvt at fffff4e000: moortec,ts-coeff-g: 42740 is not a multiple of 100
> from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt at fffff4e000: moortec,ts-coeff-j: -160 is not a multiple of 100
> from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt at fffff4e000: moortec,ts-coeff-g: 42740 is not a multiple of 100
> from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt at fffff4e000: moortec,ts-coeff-j: -160 is not a multiple of 100
> from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
Then it looks like the binding is to be blamed for not allowing fine
tweak.
>
> Thanks,
> Drew
More information about the linux-riscv
mailing list