[PATCH v2] riscv: dts: spacemit: add UART resets for Soc K1

[Hendrik Hamerlinck]

The UARTs in the SpacemiT K1 device tree are probed by the 8250_of driver,
but without reset lines they remain non-functional.

Add reset control entries so that the UARTs can operate when mapped to
devices. UART0 is already de-asserted by the bootloader, but include its
reset as well to avoid relying on bootloader state.

Tested on Orange Pi RV2 and Banana Pi BPI-F3 boards, with UART9 enabled
and verified functional.

Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck at hammernet.be>
---
Changes in v2:
- Improved changelog
- Omitted current-speed property for UART0
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index abde8bb07c95..6c68b2e54675 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -667,6 +667,7 @@ uart0: serial at d4017000 {
 				clocks = <&syscon_apbc CLK_UART0>,
 					 <&syscon_apbc CLK_UART0_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART0>;
 				interrupts = <42>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -680,6 +681,7 @@ uart2: serial at d4017100 {
 				clocks = <&syscon_apbc CLK_UART2>,
 					 <&syscon_apbc CLK_UART2_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART2>;
 				interrupts = <44>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -693,6 +695,7 @@ uart3: serial at d4017200 {
 				clocks = <&syscon_apbc CLK_UART3>,
 					 <&syscon_apbc CLK_UART3_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART3>;
 				interrupts = <45>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -706,6 +709,7 @@ uart4: serial at d4017300 {
 				clocks = <&syscon_apbc CLK_UART4>,
 					 <&syscon_apbc CLK_UART4_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART4>;
 				interrupts = <46>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -719,6 +723,7 @@ uart5: serial at d4017400 {
 				clocks = <&syscon_apbc CLK_UART5>,
 					 <&syscon_apbc CLK_UART5_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART5>;
 				interrupts = <47>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -732,6 +737,7 @@ uart6: serial at d4017500 {
 				clocks = <&syscon_apbc CLK_UART6>,
 					 <&syscon_apbc CLK_UART6_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART6>;
 				interrupts = <48>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -745,6 +751,7 @@ uart7: serial at d4017600 {
 				clocks = <&syscon_apbc CLK_UART7>,
 					 <&syscon_apbc CLK_UART7_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART7>;
 				interrupts = <49>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -758,6 +765,7 @@ uart8: serial at d4017700 {
 				clocks = <&syscon_apbc CLK_UART8>,
 					 <&syscon_apbc CLK_UART8_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART8>;
 				interrupts = <50>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -771,6 +779,7 @@ uart9: serial at d4017800 {
 				clocks = <&syscon_apbc CLK_UART9>,
 					 <&syscon_apbc CLK_UART9_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART9>;
 				interrupts = <51>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
-- 
2.43.0