[PATCH 1/3] dt-bindings: sram: sunxi-sram: Add regulators child

[Rob Herring (Arm)]

On Sat, 22 Jun 2024 23:07:29 +0800, Chen-Yu Tsai wrote:
> From: Samuel Holland <samuel at sholland.org>
> 
> Some sunxi SoCs have in-package regulators controlled by a register in
> the system control MMIO block. Allow a child node for this regulator
> device in addition to SRAM child nodes.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  .../allwinner,sun4i-a10-system-control.yaml   | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.example.dtb: syscon at 3000000: regulators at 3000150: False schema does not allow {'compatible': ['allwinner,sun20i-d1-system-ldos'], 'reg': [[50331984, 4]], 'ldoa': {'regulator-min-microvolt': [[1800000]], 'regulator-max-microvolt': [[1800000]]}, 'ldob': {'regulator-name': ['vcc-dram'], 'regulator-min-microvolt': [[1500000]], 'regulator-max-microvolt': [[1500000]]}}
	from schema $id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.example.dtb: /example-1/syscon at 3000000/regulators at 3000150: failed to match any schema with compatible: ['allwinner,sun20i-d1-system-ldos']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240622150731.1105901-2-wens@kernel.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.