[PATCH v2 0/6] Initial device tree support for StarFive JH8100 SoC

[JeeHeng Sia]

Thank you, Krzysztof, Conor, and LeyFoon, for your comments.
I will prepare version 3 to address all the feedback.

> -----Original Message-----
> From: JeeHeng Sia <jeeheng.sia at starfivetech.com>
> Sent: Wednesday, November 29, 2023 2:01 PM
> To: kernel at esmil.dk; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org; krzk at kernel.org; conor+dt at kernel.org;
> paul.walmsley at sifive.com; palmer at dabbelt.com; aou at eecs.berkeley.edu; daniel.lezcano at linaro.org; tglx at linutronix.de;
> conor at kernel.org; anup at brainfault.org; gregkh at linuxfoundation.org; jirislaby at kernel.org; michal.simek at amd.com; Michael Zhu
> <michael.zhu at starfivetech.com>; drew at beagleboard.org
> Cc: devicetree at vger.kernel.org; linux-riscv at lists.infradead.org; linux-kernel at vger.kernel.org; JeeHeng Sia
> <jeeheng.sia at starfivetech.com>; Leyfoon Tan <leyfoon.tan at starfivetech.com>
> Subject: [PATCH v2 0/6] Initial device tree support for StarFive JH8100 SoC
> 
> StarFive JH8100 SoC consists of 4 RISC-V performance Cores (Dubhe-90) and
> 2 RISC-V energy efficient cores (Dubhe-80). It also features various
> interfaces such as DDR4, Gbit-Ether, CAN, USB 3.2, SD/MMC, etc., making it
> ideal for high-performance computing scenarios.
> 
> This patch series introduces initial SoC DTSI support for the StarFive
> JH8100 SoC. The relevant dt-binding documentation has been updated
> accordingly. Below is the list of IP blocks added in the initial SoC DTSI,
> which can be used for booting via initramfs on FPGA:
> 
> - StarFive Dubhe-80 CPU
> - StarFive Dubhe-90 CPU
> - PLIC
> - CLINT
> - UART
> 
> The primary goal is to include foundational patches so that additional
> drivers can be built on top of this framework.
> 
> Changes since v1:
> - Dropped patch 5.
> - Moved timebase-frequency from .dts to .dtsi.
> - Moved soc node from .dts to .dtsi.
> - Revised the title for the dt-binding document by removing Xilinx
>   wording.
> - Added a full stop to the end of the commit messages.
> - Removed extra blank lines.
> - Used hyphen for a node name.
> - Added more recipients to the mailing list.
> 
> Sia Jee Heng (6):
>   dt-bindings: riscv: Add StarFive Dubhe compatibles
>   dt-bindings: riscv: Add StarFive JH8100 SoC
>   dt-bindings: timer: Add StarFive JH8100 clint
>   dt-bindings: interrupt-controller: Add StarFive JH8100 plic
>   dt-bindings: serial: cdns: Add new compatible string for StarFive
>     JH8100 UART
>   riscv: dts: starfive: Add initial StarFive JH8100 device tree
> 
>  .../sifive,plic-1.0.0.yaml                    |   1 +
>  .../devicetree/bindings/riscv/cpus.yaml       |   2 +
>  .../devicetree/bindings/riscv/starfive.yaml   |   5 +-
>  .../devicetree/bindings/serial/cdns,uart.yaml |   4 +
>  .../bindings/timer/sifive,clint.yaml          |   1 +
>  arch/riscv/boot/dts/starfive/Makefile         |   1 +
>  arch/riscv/boot/dts/starfive/jh8100-evb.dts   |  28 ++
>  arch/riscv/boot/dts/starfive/jh8100.dtsi      | 378 ++++++++++++++++++
>  8 files changed, 419 insertions(+), 1 deletion(-)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh8100-evb.dts
>  create mode 100644 arch/riscv/boot/dts/starfive/jh8100.dtsi
> 
> 
> base-commit: 18d46e76d7c2eedd8577fae67e3f1d4db25018b0
> --
> 2.34.1