[PATCH 6/7] serial: xilinx_uartps: Add new compatible string for StarFive

[Krzysztof Kozlowski]

On 28/11/2023 06:25, JeeHeng Sia wrote:
> 
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzk at kernel.org>
>> Sent: Monday, November 27, 2023 4:49 PM
>> To: JeeHeng Sia <jeeheng.sia at starfivetech.com>; paul.walmsley at sifive.com; palmer at dabbelt.com; aou at eecs.berkeley.edu;
>> conor at kernel.org; kernel at esmil.dk; robh+dt at kernel.org; emil.renner.berthing at canonical.com
>> Cc: linux-riscv at lists.infradead.org; linux-kernel at vger.kernel.org; Leyfoon Tan <leyfoon.tan at starfivetech.com>
>> Subject: Re: [PATCH 6/7] serial: xilinx_uartps: Add new compatible string for StarFive
>>
>> On 27/11/2023 02:36, Sia Jee Heng wrote:
>>> This patch adds the new compatible string for StarFive JH8100 SoC
>>>
>>> Signed-off-by: Sia Jee Heng <jeeheng.sia at starfivetech.com>
>>> Reviewed-by: Ley Foon Tan <leyfoon.tan at starfivetech.com>
>>> ---
>>>  drivers/tty/serial/xilinx_uartps.c | 3 ++-
>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
>>> index 66a45a634158..170901c143c2 100644
>>> --- a/drivers/tty/serial/xilinx_uartps.c
>>> +++ b/drivers/tty/serial/xilinx_uartps.c
>>> @@ -1210,7 +1210,7 @@ OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
>>>  OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
>>>  OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
>>>  OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
>>> -
>>> +OF_EARLYCON_DECLARE(cdns, "starfive,jh8100-uart", cdns_early_console_setup);
>>>
>>>  /* Static pointer to console port */
>>>  static struct uart_port *console_port;
>>> @@ -1448,6 +1448,7 @@ static const struct of_device_id cdns_uart_of_match[] = {
>>>  	{ .compatible = "cdns,uart-r1p8", },
>>>  	{ .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
>>>  	{ .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
>>> +	{ .compatible = "starfive,jh8100-uart", },
>>
>> Why you do not express compatibility in your bindings? Skip this driver
>> change.
> The compatibility string was added to the binding in the 5th patch. We need to add this compatibility string to the driver, as the other compatibilities were used for other SoCs.

You did not add "compatibility string" but compatible. I am asking why
you are not expressing in your bindings the compatibility between this
and other devices.

And no, you do not need driver change for compatible devices, so again:
skip this driver change.


Best regards,
Krzysztof