[PATCH v2 04/13] RISC-V: crypto: add Zvkned accelerated AES implementation
Jerry Shih
jerry.shih at sifive.com
Mon Nov 27 20:22:26 PST 2023
On Nov 28, 2023, at 11:56, Eric Biggers <ebiggers at kernel.org> wrote:
> On Mon, Nov 27, 2023 at 03:06:54PM +0800, Jerry Shih wrote:
>> +int riscv64_aes_setkey(struct crypto_aes_ctx *ctx, const u8 *key,
>> + unsigned int keylen)
>> +{
>> + int ret;
>> +
>> + ret = aes_check_keylen(keylen);
>> + if (ret < 0)
>> + return -EINVAL;
>> +
>> + /*
>> + * The RISC-V AES vector crypto key expanding doesn't support AES-192.
>> + * Use the generic software key expanding for that case.
>> + */
>> + if ((keylen == 16 || keylen == 32) && crypto_simd_usable()) {
>> + /*
>> + * All zvkned-based functions use encryption expanding keys for both
>> + * encryption and decryption.
>> + */
>> + kernel_vector_begin();
>> + rv64i_zvkned_set_encrypt_key(key, keylen, ctx);
>> + kernel_vector_end();
>> + } else {
>> + ret = aes_expandkey(ctx, key, keylen);
>> + }
>
> rv64i_zvkned_set_encrypt_key() does not initialize crypto_aes_ctx::key_dec.
> So, decryption results will be incorrect if !crypto_simd_usable() later.
Will we have the situation that `crypto_simd_usable()` condition is not consistent
during the aes_setkey(), aes_enc/dec()? If yes, all accelerated(or HW specific)
crypto algorithms should do the same implementations as the sw fallback path
since the `crypto_simd_usable()` will change back and forth.
>> +static int aes_setkey(struct crypto_tfm *tfm, const u8 *key,
>> + unsigned int keylen)
>
> It's best to avoid generic-sounding function names like this that could collide
> with functions in crypto/ or lib/crypto/. A better name for this function, for
> example, would be aes_setkey_zvkned().
Thx, I will fix that.
>> diff --git a/arch/riscv/crypto/aes-riscv64-zvkned.pl b/arch/riscv/crypto/aes-riscv64-zvkned.pl
>> new file mode 100644
>> index 000000000000..303e82d9f6f0
>> --- /dev/null
>> +++ b/arch/riscv/crypto/aes-riscv64-zvkned.pl
> [...]
>> +L_enc_128:
> [...]
>> +L_enc_192:
> [...]
>> +L_enc_256:
>
> There's some severe source code duplication going on in the AES assembly, with
> the three AES variants having separate source code. You can just leave this
> as-is since this is what was merged into OpenSSL and we are borrowing that for
> now, but I do expect that we'll want to clean this up later.
Do we prefer the code with the branches instead of the specified implementation?
We could make AES-128/192/256 together like:
@{[vaesz_vs $V24, $V1]}
@{[vaesem_vs $V24, $V2]}
@{[vaesem_vs $V24, $V3]}
@{[vaesem_vs $V24, $V4]}
@{[vaesem_vs $V24, $V5]}
@{[vaesem_vs $V24, $V6]}
@{[vaesem_vs $V24, $V7]}
@{[vaesem_vs $V24, $V8]}
@{[vaesem_vs $V24, $V9]}
@{[vaesem_vs $V24, $V10]}
beq $ROUND, $ROUND_11, 1f
@{[vaesem_vs $V24, $V11]}
@{[vaesem_vs $V24, $V12]}
beq $ROUND, $ROUND_13, 1f
@{[vaesem_vs $V24, $V13]}
@{[vaesem_vs $V24, $V14]}
1:
@{[vaesef_vs $V24, $V15]}
But we will have the additional costs for the branches.
> - Eric
More information about the linux-riscv
mailing list