[RFC PATCH] membarrier: riscv: Provide core serializing command
Robbin Ehn
rehn at rivosinc.com
Wed Nov 22 22:52:36 PST 2023
On Thu, Nov 23, 2023 at 2:07 AM Charlie Jenkins <charlie at rivosinc.com> wrote:
>
> On Thu, Nov 09, 2023 at 08:24:58PM +0100, Andrea Parri wrote:
> > Mathieu, all,
> >
> > Sorry for the delay,
> >
> > > AFAIR this patch implements sync_core_before_usermode which gets used by
> > > membarrier_mm_sync_core_before_usermode() to handle the uthread->kthread->uthread
> > > case. It relies on switch_mm issuing a core serializing instruction as well.
> > >
> > > Looking at RISC-V switch_mm(), I see that switch_mm() calls:
> > >
> > > flush_icache_deferred(next, cpu);
> > >
> > > which only issues a fence.i if a deferred icache flush was required. We're
> > > missing the part that sets the icache_stale_mask cpumask bits when a
> > > MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is invoked.
> >
> > [...]
> >
> > > The only part where I think you may want to keep some level of deferred
> > > icache flushing as you do now is as follows:
> > >
> > > - when membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is invoked,
> > > call a new architecture hook which sets cpumask bits in the mm context
> > > that tells the next switch_mm on each cpu to issue fence.i for that mm.
> > > - keep something like flush_icache_deferred as you have now.
> > >
> > > Otherwise, I fear the overhead of a very expensive fence.i would be too
> > > much when processes registering with MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE
> > > and start doing fence.i on each and every switch_mm().
> > >
> > > So you'd basically rely on membarrier to only issue IPIs to the CPUs which are
> > > currently running threads belonging to the mm, and handle the switch_mm with
> > > the sync_core_before_usermode() for uthread->kthread->uthread case, and implement
> > > a deferred icache flush for the typical switch_mm() case.
> >
> > I've (tried to) put this together and obtained the two patches reported below.
> > Please let me know if this aligns with your intentions and/or there's interest
> > in a proper submission.
> >
> > Andrea
> >
> >
> > From e7d07a6c04b2565fceedcd71c2175e7df7e11d96 Mon Sep 17 00:00:00 2001
> > From: Andrea Parri <parri.andrea at gmail.com>
> > Date: Thu, 9 Nov 2023 11:03:00 +0100
> > Subject: [PATCH 1/2] locking: Introduce prepare_sync_core_cmd()
> >
> > Introduce an architecture function that architectures can use to set
> > up ("prepare") SYNC_CORE commands.
> >
> > The function will be used by RISC-V to update its "deferred icache-
> > flush" data structures (icache_stale_mask).
> >
> > Architectures defining prepare_sync_core_cmd() static inline need to
> > select ARCH_HAS_PREPARE_SYNC_CORE_CMD.
> >
> > Signed-off-by: Andrea Parri <parri.andrea at gmail.com>
> > Suggested-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> > ---
> > include/linux/sync_core.h | 16 +++++++++++++++-
> > init/Kconfig | 3 +++
> > kernel/sched/membarrier.c | 1 +
> > 3 files changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/linux/sync_core.h b/include/linux/sync_core.h
> > index 013da4b8b3272..67bb9794b8758 100644
> > --- a/include/linux/sync_core.h
> > +++ b/include/linux/sync_core.h
> > @@ -17,5 +17,19 @@ static inline void sync_core_before_usermode(void)
> > }
> > #endif
> >
> > -#endif /* _LINUX_SYNC_CORE_H */
> > +#ifdef CONFIG_ARCH_HAS_PREPARE_SYNC_CORE_CMD
> > +#include <asm/sync_core.h>
> > +#else
> > +/*
> > + * This is a dummy prepare_sync_core_cmd() implementation that can be used on
> > + * all architectures which provide unconditional core serializing instructions
> > + * in switch_mm().
> > + * If your architecture doesn't provide such core serializing instructions in
> > + * switch_mm(), you may need to write your own functions.
> > + */
> > +static inline void prepare_sync_core_cmd(struct mm_struct *mm)
> > +{
> > +}
> > +#endif
> >
> > +#endif /* _LINUX_SYNC_CORE_H */
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 6d35728b94b2b..61f5f982ca451 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1972,6 +1972,9 @@ source "kernel/Kconfig.locks"
> > config ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
> > bool
> >
> > +config ARCH_HAS_PREPARE_SYNC_CORE_CMD
> > + bool
> > +
> > config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
> > bool
> >
> > diff --git a/kernel/sched/membarrier.c b/kernel/sched/membarrier.c
> > index 2ad881d07752c..58f801e013988 100644
> > --- a/kernel/sched/membarrier.c
> > +++ b/kernel/sched/membarrier.c
> > @@ -320,6 +320,7 @@ static int membarrier_private_expedited(int flags, int cpu_id)
> > MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE_READY))
> > return -EPERM;
> > ipi_func = ipi_sync_core;
> > + prepare_sync_core_cmd(mm);
> > } else if (flags == MEMBARRIER_FLAG_RSEQ) {
> > if (!IS_ENABLED(CONFIG_RSEQ))
> > return -EINVAL;
> > --
> > 2.34.1
> >
> >
> > From 617896a1d58a5f8b0e5895dbc928a54e0461d959 Mon Sep 17 00:00:00 2001
> > From: Andrea Parri <parri.andrea at gmail.com>
> > Date: Tue, 7 Nov 2023 21:08:06 +0100
> > Subject: [PATCH 2/2] membarrier: riscv: Provide core serializing command
> >
> > RISC-V uses xRET instructions on return from interrupt and to go back
> > to user-space; the xRET instruction is not core serializing.
> >
> > Use FENCE.I for providing core serialization as follows:
> >
> > - by calling sync_core_before_usermode() on return from interrupt (cf.
> > ipi_sync_core()),
> >
> > - via switch_mm() and sync_core_before_usermode() (respectively, for
> > uthread->uthread and kthread->uthread transitions) to go back to
> > user-space.
> >
> > On RISC-V, the serialization in switch_mm() is activated by resetting
> > the icache_stale_mask of the mm at prepare_sync_core_cmd().
> >
> > Signed-off-by: Andrea Parri <parri.andrea at gmail.com>
> > Suggested-by: Palmer Dabbelt <palmer at dabbelt.com>
> > ---
> > .../membarrier-sync-core/arch-support.txt | 2 +-
> > arch/riscv/Kconfig | 3 +++
> > arch/riscv/include/asm/sync_core.h | 23 +++++++++++++++++++
> > 3 files changed, 27 insertions(+), 1 deletion(-)
> > create mode 100644 arch/riscv/include/asm/sync_core.h
> >
> > diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
> > index 23260ca449468..a17117d76e6d8 100644
> > --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt
> > +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
> > @@ -44,7 +44,7 @@
> > | openrisc: | TODO |
> > | parisc: | TODO |
> > | powerpc: | ok |
> > - | riscv: | TODO |
> > + | riscv: | ok |
> > | s390: | ok |
> > | sh: | TODO |
> > | sparc: | TODO |
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 9c48fecc67191..b70a0b9ea3ee7 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -27,14 +27,17 @@ config RISCV
> > select ARCH_HAS_GCOV_PROFILE_ALL
> > select ARCH_HAS_GIGANTIC_PAGE
> > select ARCH_HAS_KCOV
> > + select ARCH_HAS_MEMBARRIER_SYNC_CORE
> > select ARCH_HAS_MMIOWB
> > select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
> > select ARCH_HAS_PMEM_API
> > + select ARCH_HAS_PREPARE_SYNC_CORE_CMD
> > select ARCH_HAS_PTE_SPECIAL
> > select ARCH_HAS_SET_DIRECT_MAP if MMU
> > select ARCH_HAS_SET_MEMORY if MMU
> > select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
> > select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
> > + select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
> > select ARCH_HAS_SYSCALL_WRAPPER
> > select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
> > select ARCH_HAS_UBSAN_SANITIZE_ALL
> > diff --git a/arch/riscv/include/asm/sync_core.h b/arch/riscv/include/asm/sync_core.h
> > new file mode 100644
> > index 0000000000000..8be5e07d641ab
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/sync_core.h
> > @@ -0,0 +1,23 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef _ASM_RISCV_SYNC_CORE_H
> > +#define _ASM_RISCV_SYNC_CORE_H
> > +
> > +/*
> > + * RISC-V implements return to user-space through an xRET instruction,
> > + * which is not core serializing.
> > + */
> > +static inline void sync_core_before_usermode(void)
> > +{
> > + asm volatile ("fence.i" ::: "memory");
> > +}
> > +
> > +/*
> > + * Ensure the next switch_mm() on every CPU issues a core serializing
> > + * instruction for the given @mm.
> > + */
> > +static inline void prepare_sync_core_cmd(struct mm_struct *mm)
> > +{
> > + cpumask_setall(&mm->context.icache_stale_mask);
> > +}
> > +
> > +#endif /* _ASM_RISCV_SYNC_CORE_H */
> > --
> > 2.34.1
> >
>
> This looks good to me, can you send out a non-RFC? I just sent out
> patches to support userspace fence.i:
> https://lore.kernel.org/linux-riscv/20231122-fencei-v1-0-bec0811cb212@rivosinc.com/T/#t.
Thank you Charlie, exactly what we are looking for!
Perfect that you added selection for fence.i, so we in the future can
select Zjid/import.i instead.
/Robbin
>
> - Charlie
>
More information about the linux-riscv
mailing list