Potential config regression after 89cde455 ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")

[Ignat Korchagin]

On Wed, Nov 22, 2023 at 9:34 AM Baoquan He <bhe at redhat.com> wrote:
>
> On 11/21/23 at 09:43am, Ignat Korchagin wrote:
> > On Tue, Nov 21, 2023 at 7:53 AM Ignat Korchagin <ignat at cloudflare.com> wrote:
> > >
> > > On Tue, Nov 21, 2023 at 1:50 AM Baoquan He <bhe at redhat.com> wrote:
> > > >
> > > > Eric DeVolder's Oracle mail address is not available anymore, add his
> > > > current mail address he told me.
> > >
> > > Thank you!
> > >
> > > > On 11/20/23 at 10:52pm, Ignat Korchagin wrote:
> > > > > Good day!
> > > > >
> > > > > We have recently started to evaluate Linux 6.6 and noticed that we
> > > > > cannot disable CONFIG_KEXEC anymore, but keep CONFIG_CRASH_DUMP
> > > > > enabled. It seems to be related to commit 89cde455 ("kexec:
> > > > > consolidate kexec and crash options into kernel/Kconfig.kexec"), where
> > > > > a CONFIG_KEXEC dependency was added to CONFIG_CRASH_DUMP.
> > > > >
> > > > > In our current kernel (Linux 6.1) we only enable CONFIG_KEXEC_FILE
> > > > > with enforced signature check to support the kernel crash dumping
> > > > > functionality and would like to keep CONFIG_KEXEC disabled for
> > > > > security reasons [1].
> > > > >
> > > > > I was reading the long commit message, but the reason for adding
> > > > > CONFIG_KEXEC as a dependency for CONFIG_CRASH_DUMP evaded me. And I
> > > > > believe from the implementation perspective CONFIG_KEXEC_FILE should
> > > > > suffice here (as we successfully used it for crashdumps on Linux 6.1).
> > > > >
> > > > > Is there a reason for adding this dependency or is it just an
> > > > > oversight? Would some solution of requiring either CONFIG_KEXEC or
> > > > > CONFIG_KEXEC_FILE work here?
> > > >
> > > > I searched the patch history, found Eric didn't add the dependency on
> > > > CONFIG_KEXEC at the beginning. Later a linux-next building failure with
> > > > randconfig was reported, in there CONFIG_CRASH_DUMP enabled, while
> > > > CONFIG_KEXEC is disabled. Finally Eric added the KEXEC dependency for
> > > > CRASH_DUMP. Please see below link for more details:
> > > >
> > > > https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
> > >
> > > Thank you for digging this up. However I'm still confused, because
> > > this is exactly how we configure Linux 6.1 (although we do have
> > > CONFIG_KEXEC_FILE enabled) and we don't have any problems. I believe
> > > we did not investigate this issue properly.
> >
> > I did some preliminary investigation for this. If I patch out the
> > dependency on CONFIG_KEXEC the kernel builds just fine for x86
> > (without CONFIG_CRASH_HOTPLUG - which is probably another issue) - so
> > this was the previous behaviour. I can see that the reported error is
> > for arm architecture and was able to reproduce it with a simple cross
> > compiler in Debian. However, I think it is still somehow related to
> > this patchset as the previous kernels (up to 6.5) build fine with just
> > CONFIG_CRASH_DUMP and without CONFIG_KEXEC for arm as well. So even
> > for arm it was introduced in 6.6.
>
> Thanks for the information.
>
> I haven't run the reproducer of issue reported on Eric's old patchset,
> while checkout to kernel 6.1, only s390 selected KEXEC for CRASH_DUMP
> already. And with the ARM building breakage, the simplest idea is
> to select KEXEC only for ARM or S390 CRASH_DUMP. I plan to try the
> reproducer later. If you have any idea or draft patch, please feel free
> to post.

The thing is - before 6.6 even ARM did not require KEXEC for
CRASH_DUMP (at least to successfully compile), so I think we should
understand what changed first before adding a dependency for ARM. I'll
try to investigate more, if I have time.

> diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec
> index 7aff28ded2f4..382dcd8d7a9d 100644
> --- a/kernel/Kconfig.kexec
> +++ b/kernel/Kconfig.kexec
> @@ -97,7 +97,7 @@ config CRASH_DUMP
>         depends on ARCH_SUPPORTS_KEXEC
>         select CRASH_CORE
>         select KEXEC_CORE
> -       select KEXEC
> +       select KEXEC if (ARM || S390)
>
>
> arch/s390/Kconfig in kernel 6.1:
> config CRASH_DUMP
>         bool "kernel crash dumps"
>         select KEXEC
>         help
>           Generate crash dump after being started by kexec.
>           Crash dump kernels are loaded in the main kernel with kexec-tools
>           into a specially reserved region and then later executed after
>           a crash by kdump/kexec.
>           Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this.
>           This option also enables s390 zfcpdump.
>           See also <file:Documentation/s390/zfcpdump.rst>
>
> >
> > > > And besides, the newly added CONFIG_CRASH_HOTPLUG also needs
> > > > CONFIG_KEXEC if the elfcorehdr is allowed to be manipulated when
> > > > cpu/memory hotplug hapened.
> > >
> > > This still feels like a regression to me: any crash dump support
> > > should be independent of KEXEC syscalls being present. While probably
> > > the common case (including us) that the crashing kernel and recovery
> > > kernel are the same, they don't have to be. We need kexec syscall in
> > > the crashing kernel, but crashdump support in the recovery kernel (but
> > > the recovery kernel not having the kexec syscalls should be totally
> > > fine). If we do require some code definitions from kexec - at most we
> > > should put them under CONFIG_KEXEC_CORE.
> > >
> > > > Thanks
> > > > Baoquan
> > > >
> >
> > Ignat
> >
>