[PATCH 3/4] riscv: dts: sophgo: add reset dt node for cv1800b

[Jisheng Zhang]

On Mon, Nov 13, 2023 at 02:32:24PM +0000, Yixun Lan wrote:
> Hi Jisheng:

Hi

> 
> On 08:55 Mon 13 Nov     , Jisheng Zhang wrote:
> > Add the reset device tree node to cv1800b SoC.
> > 
> > Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
> > ---
> >  arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > index df40e87ee063..4032419486be 100644
> > --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > @@ -54,6 +54,12 @@ soc {
> >  		dma-noncoherent;
> >  		ranges;
> >  
> > +		rst: reset-controller at 3003000 {
> > +			compatible = "sophgo,cv1800b-reset";
> > +			reg = <0x03003000 0x1000>;
>                                           ~~~~~~~
> 			        it should be 0x28

The reg space is 4KB, but only 0x28 are used. I think 0x1000 or 0x28 are fine
since the ioremap granule is 4kB.
> 
> while please also note the 0x24 == SOFT_CPUAC_RSTN, does not compatible
> with the reset-simple driver, but as it's not implemented nor used in this driver,

But the functionality of this "autoclear" reg isn't used at all since we also
have "sticky" reset to acchieve the same feature, I.E reset cpusys. And in the
usage case of reseting cpusys, I believe "sticky" reset is preferred.

And except the cpusys reset which has both autoclear and sticky, other
resets are sticky only. I'm not sure whether it's worth to write a new
driver for almost useless feature.

> so we should be fine with this?
> 
> > +			#reset-cells = <1>;
> > +		};
> > +
> >  		uart0: serial at 4140000 {
> >  			compatible = "snps,dw-apb-uart";
> >  			reg = <0x04140000 0x100>;
> > -- 
> > 2.42.0
> > 
> 
> -- 
> Yixun Lan (dlan)
> Gentoo Linux Developer
> GPG Key ID AABEFD55