[PATCH v2 6/6] drm/vs: Add hdmi driver
Keith Zhao
keith.zhao at starfivetech.com
Mon Nov 13 04:11:42 PST 2023
On 2023/10/26 6:23, Dmitry Baryshkov wrote:
> On 25/10/2023 13:39, Keith Zhao wrote:
>> add hdmi driver as encoder and connect
>>
>> Signed-off-by: Keith Zhao <keith.zhao at starfivetech.com>
>> ---
>> drivers/gpu/drm/verisilicon/Kconfig | 8 +-
>> drivers/gpu/drm/verisilicon/Makefile | 1 +
>> drivers/gpu/drm/verisilicon/starfive_hdmi.c | 949 ++++++++++++++++++++
>> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 295 ++++++
>> drivers/gpu/drm/verisilicon/vs_drv.c | 5 +
>> drivers/gpu/drm/verisilicon/vs_drv.h | 4 +
>> 6 files changed, 1261 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
>>
>> diff --git a/drivers/gpu/drm/verisilicon/Kconfig b/drivers/gpu/drm/verisilicon/Kconfig
>> index 3a361f8c8..122c786e3 100644
>> --- a/drivers/gpu/drm/verisilicon/Kconfig
>> +++ b/drivers/gpu/drm/verisilicon/Kconfig
>> @@ -12,4 +12,10 @@ config DRM_VERISILICON
>> setting and buffer management. It does not
>> provide 2D or 3D acceleration.
>> -
>> +config DRM_VERISILICON_STARFIVE_HDMI
>> + bool "Starfive HDMI extensions"
>> + depends on DRM_VERISILICON
>> + help
>> + This selects support for StarFive soc specific extensions
>> + for the Innosilicon HDMI driver. If you want to enable
>> + HDMI on JH7110 based soc, you should select this option.
>> diff --git a/drivers/gpu/drm/verisilicon/Makefile b/drivers/gpu/drm/verisilicon/Makefile
>> index 1d48016ca..08350f25b 100644
>> --- a/drivers/gpu/drm/verisilicon/Makefile
>> +++ b/drivers/gpu/drm/verisilicon/Makefile
>> @@ -7,5 +7,6 @@ vs_drm-objs := vs_dc_hw.o \
>> vs_modeset.o \
>> vs_plane.o
>> +vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
>> obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
>> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> new file mode 100644
>> index 000000000..d296c4b71
>> --- /dev/null
>> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> @@ -0,0 +1,949 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/hdmi.h>
>> +#include <linux/i2c.h>
>> +#include <linux/irq.h>
>> +#include <linux/media-bus-format.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +
>> +#include <drm/bridge/dw_hdmi.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drm_managed.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_probe_helper.h>
>> +#include <drm/drm_simple_kms_helper.h>
>> +
>> +#include "starfive_hdmi.h"
>> +#include "vs_drv.h"
>> +#include "vs_crtc.h"
>> +
>> +static struct starfive_hdmi *encoder_to_hdmi(struct drm_encoder *encoder)
>> +{
>> + return container_of(encoder, struct starfive_hdmi, encoder);
>> +}
>> +
>> +static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
>> +{
>> + return container_of(connector, struct starfive_hdmi, connector);
>> +}
>> +
>> +struct starfive_hdmi_i2c {
>> + struct i2c_adapter adap;
>> +
>> + u8 ddc_addr;
>> + u8 segment_addr;
>> + /* protects the edid data when use i2c cmd to read edid */
>> + struct mutex lock;
>> + struct completion cmp;
>> +};
>> +
>> +static const struct pre_pll_config pre_pll_cfg_table[] = {
>> + { 25175000, 25175000, 1, 100, 2, 3, 3, 12, 3, 3, 4, 0, 0xf55555},
>> + { 25200000, 25200000, 1, 100, 2, 3, 3, 12, 3, 3, 4, 0, 0},
>> + { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
>
> Such data structures are usually pretyt limited and hard to handle. Could you please replace it with the runtime calculations of
>
>> + { 27027000, 27027000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0x170a3d},
>> + { 28320000, 28320000, 1, 28, 2, 1, 1, 3, 0, 3, 4, 0, 0x51eb85},
>> + { 30240000, 30240000, 1, 30, 2, 1, 1, 3, 0, 3, 4, 0, 0x3d70a3},
>> + { 31500000, 31500000, 1, 31, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + { 33750000, 33750000, 1, 33, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + { 36000000, 36000000, 1, 36, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
>> + { 46970000, 46970000, 1, 46, 2, 1, 1, 3, 0, 3, 4, 0, 0xf851eb},
>> + { 49500000, 49500000, 1, 49, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + { 49000000, 49000000, 1, 49, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 50000000, 50000000, 1, 50, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 54000000, 54000000, 1, 54, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 54054000, 54054000, 1, 54, 2, 1, 1, 3, 0, 3, 4, 0, 0x0dd2f1},
>> + { 57284000, 57284000, 1, 57, 2, 1, 1, 3, 0, 3, 4, 0, 0x48b439},
>> + { 58230000, 58230000, 1, 58, 2, 1, 1, 3, 0, 3, 4, 0, 0x3ae147},
>> + { 59341000, 59341000, 1, 59, 2, 1, 1, 3, 0, 3, 4, 0, 0x574bc6},
>> + { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
>> + { 65000000, 65000000, 1, 130, 2, 2, 2, 12, 0, 2, 2, 0, 0},
>> + { 68250000, 68250000, 1, 68, 2, 1, 1, 3, 0, 3, 4, 0, 0x3fffff},
>> + { 71000000, 71000000, 1, 71, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xe6ae6b},
>> + { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
>> + { 75000000, 75000000, 1, 75, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + { 78750000, 78750000, 1, 78, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + { 79500000, 79500000, 1, 79, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + { 83500000, 83500000, 2, 167, 2, 1, 1, 1, 0, 0, 6, 0, 0},
>> + { 83500000, 104375000, 1, 104, 2, 1, 1, 1, 1, 0, 5, 0, 0x600000},
>> + { 84858000, 84858000, 1, 85, 2, 1, 1, 3, 0, 3, 4, 0, 0xdba5e2},
>> + { 85500000, 85500000, 1, 85, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + { 85750000, 85750000, 1, 85, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + { 85800000, 85800000, 1, 85, 2, 1, 1, 3, 0, 3, 4, 0, 0xcccccc},
>> + { 88750000, 88750000, 1, 88, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + { 89910000, 89910000, 1, 89, 2, 1, 1, 3, 0, 3, 4, 0, 0xe8f5c1},
>> + { 90000000, 90000000, 1, 90, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {101000000, 101000000, 1, 101, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {102250000, 102250000, 1, 102, 2, 1, 1, 3, 0, 3, 4, 0, 0x3fffff},
>> + {106500000, 106500000, 1, 106, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + {108000000, 108000000, 1, 90, 3, 0, 0, 5, 0, 2, 2, 0, 0},
>> + {119000000, 119000000, 1, 119, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {131481000, 131481000, 1, 131, 2, 1, 1, 3, 0, 3, 4, 0, 0x7b22d1},
>> + {135000000, 135000000, 1, 135, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {136750000, 136750000, 1, 136, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + {147180000, 147180000, 1, 147, 2, 1, 1, 3, 0, 3, 4, 0, 0x2e147a},
>> + {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xe6ae6b},
>> + {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
>> + {154000000, 154000000, 1, 154, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {156000000, 156000000, 1, 156, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {157000000, 157000000, 1, 157, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {162000000, 162000000, 1, 162, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {174250000, 174250000, 1, 145, 3, 0, 0, 5, 0, 2, 2, 0, 0x355555},
>> + {174500000, 174500000, 1, 174, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + {174570000, 174570000, 1, 174, 2, 1, 1, 3, 0, 3, 4, 0, 0x91eb84},
>> + {175500000, 175500000, 1, 175, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + {185590000, 185590000, 1, 185, 2, 1, 1, 3, 0, 3, 4, 0, 0x970a3c},
>> + {187000000, 187000000, 1, 187, 2, 1, 1, 3, 0, 3, 4, 0, 0},
>> + {241500000, 241500000, 1, 161, 1, 1, 1, 4, 0, 2, 2, 0, 0},
>> + {241700000, 241700000, 1, 241, 2, 1, 1, 3, 0, 3, 4, 0, 0xb33332},
>> + {262750000, 262750000, 1, 262, 2, 1, 1, 3, 0, 3, 4, 0, 0xcfffff},
>> + {296500000, 296500000, 1, 296, 2, 1, 1, 3, 0, 3, 4, 0, 0x7fffff},
>> + {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xe6ae6b},
>> + {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
>> + {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
>> + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
>> +};
>> +
>> +static const struct post_pll_config post_pll_cfg_table[] = {
>> + {25200000, 1, 80, 13, 3, 1},
>> + {27000000, 1, 40, 11, 3, 1},
>> + {33750000, 1, 40, 11, 3, 1},
>> + {49000000, 1, 20, 1, 3, 3},
>> + {241700000, 1, 20, 1, 3, 3},
>> + {297000000, 4, 20, 0, 0, 3},
>> + {594000000, 4, 20, 0, 0, 0},
>> + { /* sentinel */ }
>> +};
>> +
>> +inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
>> +{
>> + return readl_relaxed(hdmi->regs + (offset) * 0x04);
>> +}
>> +
>> +inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
>> +{
>> + writel_relaxed(val, hdmi->regs + (offset) * 0x04);
>> +}
>> +
>> +inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
>> + u32 msk, u32 val)
>> +{
>> + u8 temp = hdmi_readb(hdmi, offset) & ~msk;
>> +
>> + temp |= val & msk;
>> + hdmi_writeb(hdmi, offset, temp);
>> +}
>> +
>> +static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + int ret;
>> +
>> + ret = clk_prepare_enable(hdmi->sys_clk);
>> + if (ret) {
>> + dev_err(dev, "Cannot enable HDMI sys clock: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_prepare_enable(hdmi->mclk);
>> + if (ret) {
>> + dev_err(dev, "Cannot enable HDMI mclk clock: %d\n", ret);
>> + goto err_mclk;
>> + }
>> + ret = clk_prepare_enable(hdmi->bclk);
>
> This code begs to use clk_bulk instead.
>
>> + if (ret) {
>> + dev_err(dev, "Cannot enable HDMI bclk clock: %d\n", ret);
>> + goto err_bclk;
>> + }
>> + ret = reset_control_deassert(hdmi->tx_rst);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to deassert tx_rst\n");
>> + goto err_rst;
>> + }
>> + return 0;
>> +
>> +err_rst:
>> + clk_disable_unprepare(hdmi->bclk);
>> +err_bclk:
>> + clk_disable_unprepare(hdmi->mclk);
>> +err_mclk:
>> + clk_disable_unprepare(hdmi->sys_clk);
>> + return ret;
>> +}
>> +
>> +static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + int ret;
>> +
>> + ret = reset_control_assert(hdmi->tx_rst);
>> + if (ret < 0)
>> + dev_err(dev, "failed to assert tx_rst\n");
>> +
>> + clk_disable_unprepare(hdmi->sys_clk);
>> + clk_disable_unprepare(hdmi->mclk);
>> + clk_disable_unprepare(hdmi->bclk);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int hdmi_system_pm_suspend(struct device *dev)
>> +{
>> + return pm_runtime_force_suspend(dev);
>> +}
>> +
>> +static int hdmi_system_pm_resume(struct device *dev)
>> +{
>> + return pm_runtime_force_resume(dev);
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_PM
>> +static int hdmi_runtime_suspend(struct device *dev)
>> +{
>> + struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> +
>> + starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static int hdmi_runtime_resume(struct device *dev)
>> +{
>> + struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> +
>> + return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
>> +}
>> +#endif
>> +
>> +static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
>> +}
>> +
>> +static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
>
> It looks like one can inline these two helpers w/o too much troubles.
>
>> +}
>> +
>> +static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
>> +{
>> + u32 val;
>> + u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
>> + hdmi->post_cfg->postdiv : 0x00;
>> + u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
>> + 0x0e : 0x02;
>> +
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
>> + STARFIVE_POST_PLL_POST_DIV_ENABLE |
>> + STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
>> + STARFIVE_POST_PLL_POWER_DOWN);
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg->prediv));
>> +
>> + val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
>> + if (!hdmi->pre_cfg->fracdiv)
>> + val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
>> + STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg->fbdiv) | val);
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
>> + STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg->fbdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg->tmds_div_c) |
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg->tmds_div_a) |
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg->tmds_div_b));
>> +
>> + if (hdmi->pre_cfg->fracdiv) {
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
>> + STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg->fracdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
>> + STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg->fracdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
>> + STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg->fracdiv));
>> + }
>> +
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
>> + STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg->pclk_div_a) |
>> + STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg->pclk_div_b));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
>> + STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg->pclk_div_c) |
>> + STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg->pclk_div_d));
>> +
>> + /*pre-pll power down*/
>> + hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
>> +
>> + hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
>> + STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
>> +}
>> +
>> +static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
>> + STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
>> +}
>> +
>> +static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
>> +{
>> + /*first send 0 to this bit, then send 1 and keep 1 into this bit*/
>> + hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
>> + hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
>> +}
>> +
>> +static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
>> +{
>> + int ddc_bus_freq;
>> +
>> + ddc_bus_freq = (clk_get_rate(hdmi->sys_clk) >> 2) / HDMI_SCL_RATE;
>> +
>> + hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
>> + hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
>> +
>> + /* Clear the EDID interrupt flag and mute the interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +}
>> +
>> +static const
>> +struct pre_pll_config *starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi,
>> + unsigned long rate)
>> +{
>> + const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> +
>> + rate = (rate / 1000) * 1000;
>> + for (; cfg->pixclock != 0; cfg++)
>> + if (cfg->tmdsclock == rate && cfg->pixclock == rate)
>> + break;
>> +
>> + if (cfg->pixclock == 0)
>> + return ERR_PTR(-EINVAL);
>> +
>> + return cfg;
>> +}
>> +
>> +static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi->post_cfg = post_pll_cfg_table;
>> +
>> + hdmi->pre_cfg = starfive_hdmi_phy_get_pre_pll_cfg(hdmi, hdmi->tmds_rate);
>> + if (IS_ERR(hdmi->pre_cfg))
>> + return PTR_ERR(hdmi->pre_cfg);
>> +
>> + for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
>> + if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
>> + break;
>> +
>> + starfive_hdmi_config_pll(hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
>> + struct drm_display_mode *mode)
>> +{
>> + int value;
>> + /* Set detail external video timing */
>> + value = mode->htotal;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value & 0xFF);
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_H, (value >> 8) & 0xFF);
>
> As you have hdmi_writeb already, adding hdmi_writew will help here.
>
>> +
>> + value = mode->htotal - mode->hdisplay;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
>> +
>> + value = mode->htotal - mode->hsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
>> +
>> + value = mode->hsync_end - mode->hsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value & 0xFF);
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_H, (value >> 8) & 0xFF);
>> +
>> + value = mode->vtotal;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value & 0xFF);
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_H, (value >> 8) & 0xFF);
>> +
>> + value = mode->vtotal - mode->vdisplay;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
>> +
>> + value = mode->vtotal - mode->vsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
>> +
>> + value = mode->vsync_end - mode->vsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
>> +
>> + /* Set detail external video timing polarity and interlace mode */
>> + value = v_EXTERANL_VIDEO(1);
>> + value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
>> + v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
>> + value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
>> + v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
>> + value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
>> + v_INETLACE(1) : v_INETLACE(0);
>> +
>> + hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
>> + struct drm_display_mode *mode)
>> +{
>> + hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
>> + hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
>> + hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
>> +
>> + hdmi->tmds_rate = mode->clock * 1000;
>> + starfive_hdmi_phy_clk_set_rate(hdmi);
>> +
>> + while (!(hdmi_readb(hdmi, STARFIVE_PRE_PLL_LOCK_STATUS) & 0x1))
>> + continue;
>> + while (!(hdmi_readb(hdmi, STARFIVE_POST_PLL_LOCK_STATUS) & 0x1))
>> + continue;
>
> Please use read_iopoll_timeout here.
>
>> +
>> + /*turn on LDO*/
>> + hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
>> + /*turn on serializer*/
>> + hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
>> +
>> + starfive_hdmi_tx_phy_power_down(hdmi);
>> + starfive_hdmi_config_video_timing(hdmi, mode);
>> + starfive_hdmi_tx_phy_power_on(hdmi);
>> +
>> + starfive_hdmi_tmds_driver_on(hdmi);
>> + starfive_hdmi_sync_tmds(hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode *adj_mode)
>> +{
>> + struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> + drm_mode_copy(&hdmi->previous_mode, adj_mode);
>
> Why do you need it?
>
>> +}
>> +
>> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
>> +{
>> + struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> + int ret, idx;
>> + struct drm_device *drm = hdmi->connector.dev;
>> +
>> + if (drm && !drm_dev_enter(drm, &idx))
>> + return;
>> +
>> + ret = pm_runtime_get_sync(hdmi->dev);
>> + if (ret < 0)
>> + return;
>> + mdelay(10);
>> + starfive_hdmi_setup(hdmi, mode);
>> +
>> + if (drm)
>> + drm_dev_exit(idx);
>> +}
>> +
>> +static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
>> +{
>> + struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> + int idx;
>> + struct drm_device *drm = hdmi->connector.dev;
>> +
>> + if (drm && !drm_dev_enter(drm, &idx))
>> + return;
>> +
>> + pm_runtime_put(hdmi->dev);
>> +
>> + if (drm)
>> + drm_dev_exit(idx);
>> +}
>> +
>> +static int
>> +starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
>> + struct drm_crtc_state *crtc_state,
>> + struct drm_connector_state *conn_state)
>> +{
>> + bool valid = false;
>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode;
>> + struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
>> +
>> + vs_crtc_state->encoder_type = encoder->encoder_type;
>> + vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
>> +
>> + const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> + int pclk = mode->clock * 1000;
>> +
>> + for (; cfg->pixclock != 0; cfg++) {
>> + if (pclk == cfg->pixclock) {
>> + if (pclk > 297000000)
>
> Magic value.
>
>> + continue;
>> +
>> + valid = true;
>> + break;
>> + }
>> + }
>> +
>> + return (valid) ? 0 : -EINVAL;
>> +}
>> +
>> +static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
>> + .enable = starfive_hdmi_encoder_enable,
>> + .disable = starfive_hdmi_encoder_disable,
>> + .mode_set = starfive_hdmi_encoder_mode_set,
>> + .atomic_check = starfive_hdmi_encoder_atomic_check,
>> +};
>> +
>> +static enum drm_connector_status
>> +starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
>> +{
>> + struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> + struct drm_device *drm = hdmi->connector.dev;
>> + int ret;
>> + int idx;
>> +
>> + if (drm && !drm_dev_enter(drm, &idx))
>> + return connector_status_disconnected;
>> +
>> + ret = pm_runtime_get_sync(hdmi->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
>> + connector_status_connected : connector_status_disconnected;
>> + pm_runtime_put(hdmi->dev);
>> +
>> + if (drm)
>> + drm_dev_exit(idx);
>> +
>> + return ret;
>> +}
>> +
>> +static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
>> +{
>> + struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> + struct edid *edid;
>> + int ret = 0;
>> +
>> + if (!hdmi->ddc)
>> + return 0;
>> + ret = pm_runtime_get_sync(hdmi->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + edid = drm_get_edid(connector, hdmi->ddc);
>> + if (edid) {
>> + hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>> + hdmi->hdmi_data.sink_has_audio = drm_detect_monitor_audio(edid);
>> + drm_connector_update_edid_property(connector, edid);
>> + ret = drm_add_edid_modes(connector, edid);
>> + kfree(edid);
>> + }
>> + pm_runtime_put(hdmi->dev);
>
> Can you use drm_connector_helper_get_modes_from_ddc() here? And then drm_display_info.is_hdmi and .has_audio.
>
>> +
>> + return ret;
>> +}
>> +
>> +static enum drm_mode_status
>> +starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
>> + struct drm_display_mode *mode)
>> +{
>> + const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> + int pclk = mode->clock * 1000;
>> + bool valid = false;
>> +
>> + for (; cfg->pixclock != 0; cfg++) {
>> + if (pclk == cfg->pixclock) {
>> + if (pclk > 297000000)
>
> magic value
>
>> + continue;
>> +
>> + valid = true;
>> + break;
>> + }
>> + }
>> +
>> + return (valid) ? MODE_OK : MODE_BAD;
>> +}
>> +
>> +static int
>> +starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
>> + u32 maxX, u32 maxY)
>> +{
>> + return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
>> +}
>> +
>> +static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
>> + .fill_modes = starfive_hdmi_probe_single_connector_modes,
>> + .detect = starfive_hdmi_connector_detect,
>> + .reset = drm_atomic_helper_connector_reset,
>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
>> + .get_modes = starfive_hdmi_connector_get_modes,
>> + .mode_valid = starfive_hdmi_connector_mode_valid,
>> +};
>> +
>> +static int starfive_hdmi_register(struct drm_device *drm, struct starfive_hdmi *hdmi)
>> +{
>> + struct drm_encoder *encoder = &hdmi->encoder;
>> + struct device *dev = hdmi->dev;
>> +
>> + encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
>> +
>> + /*
>> + * If we failed to find the CRTC(s) which this encoder is
>> + * supposed to be connected to, it's because the CRTC has
>> + * not been registered yet. Defer probing, and hope that
>> + * the required CRTC is added later.
>> + */
>> + if (encoder->possible_crtcs == 0)
>> + return -EPROBE_DEFER;
>> +
>> + drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
>> +
>> + hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> + drm_connector_helper_add(&hdmi->connector,
>> + &starfive_hdmi_connector_helper_funcs);
>> + drmm_connector_init(drm, &hdmi->connector,
>> + &starfive_hdmi_connector_funcs,
>> + DRM_MODE_CONNECTOR_HDMIA,
>
> On an embedded device one can not be so sure. There can be MHL or HDMI Alternative Mode. Usually we use drm_bridge here and drm_bridge_connector.
>
>> + hdmi->ddc);
>> +
>> + drm_connector_attach_encoder(&hdmi->connector, encoder);
>> +
>> + return 0;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
>> +{
>> + struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> + u8 stat;
>> +
>> + stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
>> + if (!(stat & m_INT_EDID_READY))
>> + return IRQ_NONE;
>> +
>> + /* Clear HDMI EDID interrupt flag */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +
>> + complete(&i2c->cmp);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
>> +{
>> + struct starfive_hdmi *hdmi = dev_id;
>> + irqreturn_t ret = IRQ_NONE;
>> + u8 interrupt;
>> +
>> + if (hdmi->i2c)
>> + ret = starfive_hdmi_i2c_irq(hdmi);
>> +
>> + interrupt = hdmi_readb(hdmi, HDMI_STATUS);
>> + if (interrupt & m_INT_HOTPLUG) {
>> + hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
>> + ret = IRQ_WAKE_THREAD;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
>> +{
>> + struct starfive_hdmi *hdmi = dev_id;
>> +
>> + drm_connector_helper_hpd_irq_event(&hdmi->connector);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> +{
>> + int length = msgs->len;
>> + u8 *buf = msgs->buf;
>> + int ret;
>> +
>> + ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
>
> read_poll_timeout
Hi Dmitry:
I think using wait_for_completion_timeout here is a bit clearer than read_poll_timeout logic
I2c_read has hardware interrupt dependency. so need wait the interrupt completion.
also it comes with timeout detection.
>
>> + if (!ret)
>> + return -EAGAIN;
>> +
>> + while (length--)
>> + *buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> +{
>> + /*
>> + * The DDC module only support read EDID message, so
>> + * we assume that each word write to this i2c adapter
>> + * should be the offset of EDID word address.
>> + */
>> + if (msgs->len != 1 ||
>> + (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
>> + return -EINVAL;
>> +
>> + reinit_completion(&hdmi->i2c->cmp);
>> +
>> + if (msgs->addr == DDC_SEGMENT_ADDR)
>> + hdmi->i2c->segment_addr = msgs->buf[0];
>> + if (msgs->addr == DDC_ADDR)
>> + hdmi->i2c->ddc_addr = msgs->buf[0];
>> +
>> + /* Set edid fifo first addr */
>> + hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
>> +
>> + /* Set edid word address 0x00/0x80 */
>> + hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
>> +
>> + /* Set edid segment pointer */
>> + hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
>> + struct i2c_msg *msgs, int num)
>> +{
>> + struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
>> + struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> + int i, ret = 0;
>> +
>> + mutex_lock(&i2c->lock);
>> +
>> + /* Clear the EDID interrupt flag and unmute the interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +
>> + for (i = 0; i < num; i++) {
>> + DRM_DEV_DEBUG(hdmi->dev,
>> + "xfer: num: %d/%d, len: %d, flags: %#x\n",
>> + i + 1, num, msgs[i].len, msgs[i].flags);
>> +
>> + if (msgs[i].flags & I2C_M_RD)
>> + ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
>> + else
>> + ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
>> +
>> + if (ret < 0)
>> + break;
>> + }
>> +
>> + if (!ret)
>> + ret = num;
>> +
>> + /* Mute HDMI EDID interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> +
>> + mutex_unlock(&i2c->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
>> +{
>> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
>> +}
>> +
>> +static const struct i2c_algorithm starfive_hdmi_algorithm = {
>> + .master_xfer = starfive_hdmi_i2c_xfer,
>> + .functionality = starfive_hdmi_i2c_func,
>> +};
>> +
>> +static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
>> +{
>> + struct i2c_adapter *adap;
>> + struct starfive_hdmi_i2c *i2c;
>> + int ret;
>> +
>> + i2c = drmm_kzalloc(hdmi->drm_dev, sizeof(*i2c), GFP_KERNEL);
>> + if (!i2c)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + mutex_init(&i2c->lock);
>> + init_completion(&i2c->cmp);
>> +
>> + adap = &i2c->adap;
>> + adap->class = I2C_CLASS_DDC;
>> + adap->owner = THIS_MODULE;
>> + adap->dev.parent = hdmi->dev;
>> + adap->algo = &starfive_hdmi_algorithm;
>> + strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
>> + i2c_set_adapdata(adap, hdmi);
>> +
>> + ret = devm_i2c_add_adapter(hdmi->dev, adap);
>> + if (ret) {
>> + drm_warn(hdmi->drm_dev, "cannot add %s I2C adapter\n", adap->name);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + hdmi->i2c = i2c;
>> +
>> + drm_info(hdmi->drm_dev, "registered %s I2C bus driver success\n", adap->name);
>> +
>> + return adap;
>> +}
>> +
>> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + hdmi->sys_clk = devm_clk_get(dev, "sysclk");
>> + if (IS_ERR(hdmi->sys_clk)) {
>> + dev_err(dev, "Unable to get HDMI sysclk clk\n");
>> + return PTR_ERR(hdmi->sys_clk);
>> + }
>> + hdmi->mclk = devm_clk_get(dev, "mclk");
>> + if (IS_ERR(hdmi->mclk)) {
>> + dev_err(dev, "Unable to get HDMI mclk clk\n");
>> + return PTR_ERR(hdmi->mclk);
>> + }
>> + hdmi->bclk = devm_clk_get(dev, "bclk");
>> + if (IS_ERR(hdmi->bclk)) {
>> + dev_err(dev, "Unable to get HDMI bclk clk\n");
>> + return PTR_ERR(hdmi->bclk);
>> + }
>> + hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
>> + if (IS_ERR(hdmi->tx_rst)) {
>> + dev_err(dev, "failed to get tx_rst reset\n");
>> + return PTR_ERR(hdmi->tx_rst);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_bind(struct device *dev, struct device *master,
>> + void *data)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct drm_device *drm = dev_get_drvdata(master);
>> + struct starfive_hdmi *hdmi;
>> + struct resource *iores;
>> + int irq;
>> + int ret;
>> +
>> + hdmi = drmm_kzalloc(drm, sizeof(*hdmi), GFP_KERNEL);
>> + if (!hdmi)
>> + return -ENOMEM;
>> +
>> + hdmi = drmm_simple_encoder_alloc(drm, struct starfive_hdmi,
>> + encoder, DRM_MODE_ENCODER_TMDS);
>> +
>> + hdmi->dev = dev;
>> + hdmi->drm_dev = drm;
>> + dev_set_drvdata(dev, hdmi);
>> +
>> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + hdmi->regs = devm_ioremap_resource(dev, iores);
>
> This should go to probe
>
>> + if (IS_ERR(hdmi->regs))
>> + return PTR_ERR(hdmi->regs);
>> +
>> + ret = starfive_hdmi_get_clk_rst(dev, hdmi);
>> + if (ret < 0)
>> + return ret;
>
> And this
>
>> +
>> + ret = devm_pm_runtime_enable(dev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = pm_runtime_resume_and_get(dev);
>> + if (ret)
>> + return ret;
>> +
>> + irq = platform_get_irq(pdev, 0);
>
> And this
>
>> + if (irq < 0) {
>> + ret = irq;
>> + goto err_put_runtime_pm;
>> + }
>> +
>> + hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
>> + if (IS_ERR(hdmi->ddc)) {
>> + ret = PTR_ERR(hdmi->ddc);
>> + hdmi->ddc = NULL;
>> + goto err_put_runtime_pm;
>> + }
>> +
>> + starfive_hdmi_i2c_init(hdmi);
>> +
>> + ret = starfive_hdmi_register(drm, hdmi);
>> + if (ret)
>> + goto err_put_adapter;
>> +
>> + /* Unmute hotplug interrupt */
>> + hdmi_modb(hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
>> +
>> + ret = devm_request_threaded_irq(dev, irq, starfive_hdmi_hardirq,
>> + starfive_hdmi_irq, IRQF_SHARED,
>> + dev_name(dev), hdmi);
>> + if (ret < 0)
>> + goto err_put_adapter;
>> +
>> + pm_runtime_put_sync(dev);
>> +
>> + return 0;
>> +
>> +err_put_adapter:
>> + i2c_put_adapter(hdmi->ddc);
>> +err_put_runtime_pm:
>> + pm_runtime_put_sync(dev);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct component_ops starfive_hdmi_ops = {
>> + .bind = starfive_hdmi_bind,
>> +};
>> +
>> +static int starfive_hdmi_probe(struct platform_device *pdev)
>> +{
>> + return component_add(&pdev->dev, &starfive_hdmi_ops);
>> +}
>> +
>> +static int starfive_hdmi_remove(struct platform_device *pdev)
>> +{
>> + component_del(&pdev->dev, &starfive_hdmi_ops);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops hdmi_pm_ops = {
>> + SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
>> + SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
>> +};
>> +
>> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>> + { .compatible = "starfive,jh7110-inno-hdmi",},
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, starfive_hdmi_dt_ids);
>> +
>> +struct platform_driver starfive_hdmi_driver = {
>> + .probe = starfive_hdmi_probe,
>> + .remove = starfive_hdmi_remove,
>> + .driver = {
>> + .name = "starfive-hdmi",
>> + .of_match_table = starfive_hdmi_dt_ids,
>> + .pm = &hdmi_pm_ops,
>> + },
>> +};
>> +
>> +MODULE_AUTHOR("StarFive Corporation");
>> +MODULE_DESCRIPTION("Starfive HDMI Driver");
>> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.h b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
>> new file mode 100644
>> index 000000000..1b9a11bca
>> --- /dev/null
>> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
>> @@ -0,0 +1,295 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#ifndef __STARFIVE_HDMI_H__
>> +#define __STARFIVE_HDMI_H__
>> +
>> +#include <drm/bridge/dw_hdmi.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_probe_helper.h>
>> +#include <drm/drm_simple_kms_helper.h>
>> +#include <linux/bitfield.h>
>> +#include <linux/bits.h>
>> +
>> +#define DDC_SEGMENT_ADDR 0x30
>> +
>> +#define HDMI_SCL_RATE (100 * 1000)
>> +#define DDC_BUS_FREQ_L 0x4b
>> +#define DDC_BUS_FREQ_H 0x4c
>> +
>> +#define HDMI_SYS_CTRL 0x00
>> +#define m_RST_ANALOG BIT(6)
>> +#define v_RST_ANALOG 0
>> +#define v_NOT_RST_ANALOG BIT(6)
>> +#define m_RST_DIGITAL BIT(5)
>> +#define v_RST_DIGITAL 0
>> +#define v_NOT_RST_DIGITAL BIT(5)
>> +#define m_REG_CLK_INV BIT(4)
>> +#define v_REG_CLK_NOT_INV 0
>> +#define v_REG_CLK_INV BIT(4)
>> +#define m_VCLK_INV BIT(3)
>> +#define v_VCLK_NOT_INV 0
>> +#define v_VCLK_INV BIT(3)
>> +#define m_REG_CLK_SOURCE BIT(2)
>> +#define v_REG_CLK_SOURCE_TMDS 0
>> +#define v_REG_CLK_SOURCE_SYS BIT(2)
>> +#define m_POWER BIT(1)
>> +#define v_PWR_ON 0
>> +#define v_PWR_OFF BIT(1)
>> +#define m_INT_POL BIT(0)
>> +#define v_INT_POL_HIGH 1
>> +#define v_INT_POL_LOW 0
>> +
>> +#define HDMI_AV_MUTE 0x05
>> +#define m_AVMUTE_CLEAR BIT(7)
>> +#define m_AVMUTE_ENABLE BIT(6)
>> +#define m_AUDIO_MUTE BIT(1)
>> +#define m_VIDEO_BLACK BIT(0)
>> +#define v_AVMUTE_CLEAR(n) ((n) << 7)
>> +#define v_AVMUTE_ENABLE(n) ((n) << 6)
>> +#define v_AUDIO_MUTE(n) ((n) << 1)
>> +#define v_VIDEO_MUTE(n) ((n) << 0)
>> +
>> +#define HDMI_VIDEO_TIMING_CTL 0x08
>> +#define v_VSYNC_POLARITY(n) ((n) << 3)
>> +#define v_HSYNC_POLARITY(n) ((n) << 2)
>> +#define v_INETLACE(n) ((n) << 1)
>> +#define v_EXTERANL_VIDEO(n) ((n) << 0)
>> +
>> +#define HDMI_VIDEO_EXT_HTOTAL_L 0x09
>> +#define HDMI_VIDEO_EXT_HTOTAL_H 0x0a
>> +#define HDMI_VIDEO_EXT_HBLANK_L 0x0b
>> +#define HDMI_VIDEO_EXT_HBLANK_H 0x0c
>> +#define HDMI_VIDEO_EXT_HDELAY_L 0x0d
>> +#define HDMI_VIDEO_EXT_HDELAY_H 0x0e
>> +#define HDMI_VIDEO_EXT_HDURATION_L 0x0f
>> +#define HDMI_VIDEO_EXT_HDURATION_H 0x10
>> +#define HDMI_VIDEO_EXT_VTOTAL_L 0x11
>> +#define HDMI_VIDEO_EXT_VTOTAL_H 0x12
>> +#define HDMI_VIDEO_EXT_VBLANK 0x13
>> +#define HDMI_VIDEO_EXT_VDELAY 0x14
>> +#define HDMI_VIDEO_EXT_VDURATION 0x15
>> +
>> +#define HDMI_EDID_SEGMENT_POINTER 0x4d
>> +#define HDMI_EDID_WORD_ADDR 0x4e
>> +#define HDMI_EDID_FIFO_OFFSET 0x4f
>> +#define HDMI_EDID_FIFO_ADDR 0x50
>> +
>> +#define HDMI_INTERRUPT_MASK1 0xc0
>> +#define HDMI_INTERRUPT_STATUS1 0xc1
>> +#define m_INT_ACTIVE_VSYNC BIT(5)
>> +#define m_INT_EDID_READY BIT(2)
>> +
>> +#define HDMI_STATUS 0xc8
>> +#define m_HOTPLUG BIT(7)
>> +#define m_MASK_INT_HOTPLUG BIT(5)
>> +#define m_INT_HOTPLUG BIT(1)
>> +#define v_MASK_INT_HOTPLUG(n) (((n) & 0x1) << 5)
>
> It is untypical to have field defines which start with lowercase letter.
>
>> +
>> +#define HDMI_SYNC 0xce
>> +
>> +#define UPDATE(x, h, l) FIELD_PREP(GENMASK(h, l), x)
>> +
>> +/* REG: 0x1a0 */
>> +#define STARFIVE_PRE_PLL_CONTROL 0x1a0
>> +#define STARFIVE_PCLK_VCO_DIV_5_MASK BIT(1)
>> +#define STARFIVE_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1)
>> +#define STARFIVE_PRE_PLL_POWER_DOWN BIT(0)
>> +
>> +/* REG: 0x1a1 */
>> +#define STARFIVE_PRE_PLL_DIV_1 0x1a1
>> +#define STARFIVE_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0)
>> +#define STARFIVE_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0)
>> +
>> +/* REG: 0x1a2 */
>> +#define STARFIVE_PRE_PLL_DIV_2 0x1a2
>> +#define STARFIVE_SPREAD_SPECTRUM_MOD_DOWN BIT(7)
>> +#define STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE BIT(6)
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4)
>> +#define STARFIVE_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0)
>> +#define STARFIVE_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0)
>> +
>> +/* REG: 0x1a3 */
>> +#define STARFIVE_PRE_PLL_DIV_3 0x1a3
>> +#define STARFIVE_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
>> +
>> +/* REG: 0x1a4*/
>> +#define STARFIVE_PRE_PLL_DIV_4 0x1a4
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0)
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0)
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2)
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2)
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4)
>> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4)
>> +
>> +/* REG: 0x1a5 */
>> +#define STARFIVE_PRE_PLL_DIV_5 0x1a5
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_B_SHIFT 5
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
>> +
>> +/* REG: 0x1a6 */
>> +#define STARFIVE_PRE_PLL_DIV_6 0x1a6
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_C_SHIFT 5
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
>> +#define STARFIVE_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
>> +
>> +/* REG: 0x1a9 */
>> +#define STARFIVE_PRE_PLL_LOCK_STATUS 0x1a9
>> +
>> +/* REG: 0x1aa */
>> +#define STARFIVE_POST_PLL_DIV_1 0x1aa
>> +#define STARFIVE_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2)
>> +#define STARFIVE_POST_PLL_REFCLK_SEL_TMDS BIT(1)
>> +#define STARFIVE_POST_PLL_POWER_DOWN BIT(0)
>> +#define STARFIVE_POST_PLL_FB_DIV_8(x) UPDATE(((x) >> 8) << 4, 4, 4)
>> +
>> +/* REG:0x1ab */
>> +#define STARFIVE_POST_PLL_DIV_2 0x1ab
>> +#define STARFIVE_POST_PLL_Pre_DIV_MASK GENMASK(5, 0)
>> +#define STARFIVE_POST_PLL_PRE_DIV(x) UPDATE(x, 5, 0)
>> +
>> +/* REG: 0x1ac */
>> +#define STARFIVE_POST_PLL_DIV_3 0x1ac
>> +#define STARFIVE_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
>> +
>> +/* REG: 0x1ad */
>> +#define STARFIVE_POST_PLL_DIV_4 0x1ad
>> +#define STARFIVE_POST_PLL_POST_DIV_MASK GENMASK(2, 0)
>> +#define STARFIVE_POST_PLL_POST_DIV_2 0x0
>> +#define STARFIVE_POST_PLL_POST_DIV_4 0x1
>> +#define STARFIVE_POST_PLL_POST_DIV_8 0x3
>> +
>> +/* REG: 0x1af */
>> +#define STARFIVE_POST_PLL_LOCK_STATUS 0x1af
>> +
>> +/* REG: 0x1b0 */
>> +#define STARFIVE_BIAS_CONTROL 0x1b0
>> +#define STARFIVE_BIAS_ENABLE BIT(2)
>> +
>> +/* REG: 0x1b2 */
>> +#define STARFIVE_TMDS_CONTROL 0x1b2
>> +#define STARFIVE_TMDS_CLK_DRIVER_EN BIT(3)
>> +#define STARFIVE_TMDS_D2_DRIVER_EN BIT(2)
>> +#define STARFIVE_TMDS_D1_DRIVER_EN BIT(1)
>> +#define STARFIVE_TMDS_D0_DRIVER_EN BIT(0)
>> +#define STARFIVE_TMDS_DRIVER_ENABLE (STARFIVE_TMDS_CLK_DRIVER_EN | \
>> + STARFIVE_TMDS_D2_DRIVER_EN | \
>> + STARFIVE_TMDS_D1_DRIVER_EN | \
>> + STARFIVE_TMDS_D0_DRIVER_EN)
>> +
>> +/* REG: 0x1b4 */
>> +#define STARFIVE_LDO_CONTROL 0x1b4
>> +#define STARFIVE_LDO_D2_EN BIT(2)
>> +#define STARFIVE_LDO_D1_EN BIT(1)
>> +#define STARFIVE_LDO_D0_EN BIT(0)
>> +#define STARFIVE_LDO_ENABLE (STARFIVE_LDO_D2_EN | \
>> + STARFIVE_LDO_D1_EN | \
>> + STARFIVE_LDO_D0_EN)
>> +
>> +/* REG: 0x1be */
>> +#define STARFIVE_SERIALIER_CONTROL 0x1be
>> +#define STARFIVE_SERIALIER_D2_EN BIT(6)
>> +#define STARFIVE_SERIALIER_D1_EN BIT(5)
>> +#define STARFIVE_SERIALIER_D0_EN BIT(4)
>> +#define STARFIVE_SERIALIER_EN BIT(0)
>> +
>> +#define STARFIVE_SERIALIER_ENABLE (STARFIVE_SERIALIER_D2_EN | \
>> + STARFIVE_SERIALIER_D1_EN | \
>> + STARFIVE_SERIALIER_D0_EN | \
>> + STARFIVE_SERIALIER_EN)
>> +
>> +/* REG: 0x1cc */
>> +#define STARFIVE_RX_CONTROL 0x1cc
>> +#define STARFIVE_RX_EN BIT(3)
>> +#define STARFIVE_RX_CHANNEL_2_EN BIT(2)
>> +#define STARFIVE_RX_CHANNEL_1_EN BIT(1)
>> +#define STARFIVE_RX_CHANNEL_0_EN BIT(0)
>> +#define STARFIVE_RX_ENABLE (STARFIVE_RX_EN | \
>> + STARFIVE_RX_CHANNEL_2_EN | \
>> + STARFIVE_RX_CHANNEL_1_EN | \
>> + STARFIVE_RX_CHANNEL_0_EN)
>> +
>> +/* REG: 0x1d1 */
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_H 0x1d1
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0)
>> +/* REG: 0x1d2 */
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_M 0x1d2
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0)
>> +/* REG: 0x1d3 */
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_L 0x1d3
>> +#define STARFIVE_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0)
>> +
>> +struct pre_pll_config {
>> + unsigned long pixclock;
>> + unsigned long tmdsclock;
>> + u8 prediv;
>> + u16 fbdiv;
>> + u8 tmds_div_a;
>> + u8 tmds_div_b;
>> + u8 tmds_div_c;
>> + u8 pclk_div_a;
>> + u8 pclk_div_b;
>> + u8 pclk_div_c;
>> + u8 pclk_div_d;
>> + u8 vco_div_5_en;
>> + u32 fracdiv;
>> +};
>> +
>> +struct post_pll_config {
>> + unsigned long tmdsclock;
>> + u8 prediv;
>> + u16 fbdiv;
>> + u8 postdiv;
>> + u8 post_div_en;
>> + u8 version;
>> +};
>> +
>> +struct phy_config {
>> + unsigned long tmdsclock;
>> + u8 regs[14];
>> +};
>> +
>> +struct hdmi_data_info {
>> + int vic;
>> + bool sink_is_hdmi;
>> + bool sink_has_audio;
>> + unsigned int enc_in_format;
>> + unsigned int enc_out_format;
>> + unsigned int colorimetry;
>> +};
>> +
>> +struct starfive_hdmi {
>> + struct device *dev;
>> + struct drm_device *drm_dev;
>> + struct drm_encoder encoder;
>> + struct drm_connector connector;
>> +
>> + struct starfive_hdmi_i2c *i2c;
>> +
>> + int irq;
>> + struct clk *sys_clk;
>> + struct clk *mclk;
>> + struct clk *bclk;
>> + struct reset_control *tx_rst;
>> + void __iomem *regs;
>> +
>> + struct i2c_adapter *ddc;
>> +
>> + unsigned long tmds_rate;
>> +
>> + struct hdmi_data_info hdmi_data;
>> + struct drm_display_mode previous_mode;
>> + const struct pre_pll_config *pre_cfg;
>> + const struct post_pll_config *post_cfg;
>> +};
>> +
>> +#endif /* __STARFIVE_HDMI_H__ */
>> diff --git a/drivers/gpu/drm/verisilicon/vs_drv.c b/drivers/gpu/drm/verisilicon/vs_drv.c
>> index 3cd533cfa..9669354bd 100644
>> --- a/drivers/gpu/drm/verisilicon/vs_drv.c
>> +++ b/drivers/gpu/drm/verisilicon/vs_drv.c
>> @@ -126,6 +126,11 @@ static const struct component_master_ops vs_drm_ops = {
>> static struct platform_driver *drm_sub_drivers[] = {
>> &dc_platform_driver,
>> + /* connector + encoder*/
>> +#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
>> + &starfive_hdmi_driver,
>> +#endif
>> +
>> };
>> static struct component_match *vs_drm_match_add(struct device *dev)
>> diff --git a/drivers/gpu/drm/verisilicon/vs_drv.h b/drivers/gpu/drm/verisilicon/vs_drv.h
>> index 369ad22d6..e90723419 100644
>> --- a/drivers/gpu/drm/verisilicon/vs_drv.h
>> +++ b/drivers/gpu/drm/verisilicon/vs_drv.h
>> @@ -24,4 +24,8 @@ to_vs_drm_private(const struct drm_device *dev)
>> return container_of(dev, struct vs_drm_device, base);
>> }
>> +#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
>> +extern struct platform_driver starfive_hdmi_driver;
>> +#endif
>> +
>> #endif /* __VS_DRV_H__ */
>
More information about the linux-riscv
mailing list