[RFC PATCH V2 14/38] riscv: s64ilp32: Add sbi support
guoren at kernel.org
guoren at kernel.org
Sat Nov 11 22:14:50 PST 2023
From: Guo Ren <guoren at linux.alibaba.com>
The sbi uses xlen as base argument elements to connect m-mode and
s-mode. The previous implementation assumes sizeof(xlen_t) =
sizeof(long), but the s64ilp32's are different. So modify the sbi code
suitable with the s64ilp32 change.
Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
Signed-off-by: Guo Ren <guoren at kernel.org>
---
arch/riscv/include/asm/cpu_ops_sbi.h | 4 ++--
arch/riscv/include/asm/sbi.h | 24 ++++++++++++------------
arch/riscv/kernel/cpu_ops_sbi.c | 4 ++--
arch/riscv/kernel/sbi.c | 24 ++++++++++++------------
4 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/riscv/include/asm/cpu_ops_sbi.h b/arch/riscv/include/asm/cpu_ops_sbi.h
index d6e4665b3195..d967adad6b48 100644
--- a/arch/riscv/include/asm/cpu_ops_sbi.h
+++ b/arch/riscv/include/asm/cpu_ops_sbi.h
@@ -19,8 +19,8 @@ extern const struct cpu_operations cpu_ops_sbi;
* @stack_ptr: A pointer to the hart specific sp
*/
struct sbi_hart_boot_data {
- void *task_ptr;
- void *stack_ptr;
+ xlen_t task_ptr;
+ xlen_t stack_ptr;
};
#endif
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 5b4a1bf5f439..501e06e52078 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -123,16 +123,16 @@ enum sbi_ext_pmu_fid {
};
union sbi_pmu_ctr_info {
- unsigned long value;
+ xlen_t value;
struct {
- unsigned long csr:12;
- unsigned long width:6;
+ xlen_t csr:12;
+ xlen_t width:6;
#if __riscv_xlen == 32
- unsigned long reserved:13;
+ xlen_t reserved:13;
#else
- unsigned long reserved:45;
+ xlen_t reserved:45;
#endif
- unsigned long type:1;
+ xlen_t type:1;
};
};
@@ -254,15 +254,15 @@ enum sbi_pmu_ctr_type {
extern unsigned long sbi_spec_version;
struct sbiret {
- long error;
- long value;
+ xlen_t error;
+ xlen_t value;
};
void sbi_init(void);
-struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
- unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4,
- unsigned long arg5);
+struct sbiret sbi_ecall(int ext, int fid, xlen_t arg0,
+ xlen_t arg1, xlen_t arg2,
+ xlen_t arg3, xlen_t arg4,
+ xlen_t arg5);
void sbi_console_putchar(int ch);
int sbi_console_getchar(void);
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
index efa0f0816634..01a1e270ec1d 100644
--- a/arch/riscv/kernel/cpu_ops_sbi.c
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -71,8 +71,8 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
/* Make sure tidle is updated */
smp_mb();
- bdata->task_ptr = tidle;
- bdata->stack_ptr = task_stack_page(tidle) + THREAD_SIZE;
+ bdata->task_ptr = (ulong)tidle;
+ bdata->stack_ptr = (ulong)task_stack_page(tidle) + THREAD_SIZE;
/* Make sure boot data is updated */
smp_mb();
hsm_data = __pa(bdata);
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index c672c8ba9a2a..88eea3a99ee0 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -22,21 +22,21 @@ static int (*__sbi_rfence)(int fid, const struct cpumask *cpu_mask,
unsigned long start, unsigned long size,
unsigned long arg4, unsigned long arg5) __ro_after_init;
-struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
- unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4,
- unsigned long arg5)
+struct sbiret sbi_ecall(int ext, int fid, xlen_t arg0,
+ xlen_t arg1, xlen_t arg2,
+ xlen_t arg3, xlen_t arg4,
+ xlen_t arg5)
{
struct sbiret ret;
- register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);
- register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);
- register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);
- register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);
- register uintptr_t a4 asm ("a4") = (uintptr_t)(arg4);
- register uintptr_t a5 asm ("a5") = (uintptr_t)(arg5);
- register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);
- register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);
+ register xlen_t a0 asm ("a0") = arg0;
+ register xlen_t a1 asm ("a1") = arg1;
+ register xlen_t a2 asm ("a2") = arg2;
+ register xlen_t a3 asm ("a3") = arg3;
+ register xlen_t a4 asm ("a4") = arg4;
+ register xlen_t a5 asm ("a5") = arg5;
+ register xlen_t a6 asm ("a6") = fid;
+ register xlen_t a7 asm ("a7") = ext;
asm volatile ("ecall"
: "+r" (a0), "+r" (a1)
: "r" (a2), "r" (a3), "r" (a4), "r" (a5), "r" (a6), "r" (a7)
--
2.36.1
More information about the linux-riscv
mailing list