[PATCH v5 5/7] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock

[Krzysztof Kozlowski]

On 10/11/2023 06:41, Drew Fustini wrote:
> Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> controller instance which is typically connected to the eMMC device.
> Add mmc1 node for the second mmc controller instance which is typically
> connected to microSD slot.
> 
> Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> ---
>  arch/riscv/boot/dts/thead/th1520.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index ff364709a6df..f5ec9326c4b8 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -134,6 +134,13 @@ uart_sclk: uart-sclk-clock {
>  		#clock-cells = <0>;
>  	};
>  
> +	sdhci_clk: sdhci-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <198000000>;
> +		clock-output-names = "sdhci_clk";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&plic>;
> @@ -292,6 +299,22 @@ dmac0: dma-controller at ffefc00000 {
>  			status = "disabled";
>  		};
>  
> +		mmc0: mmc at ffe7080000 {
> +			compatible = "thead,th1520-dwcmshc";
> +			reg = <0xff 0xe7080000 0x0 0x10000>;
> +			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&sdhci_clk>;
> +			clock-names = "core";

You miss disable in each mmc node.

Best regards,
Krzysztof